Jump to content

new psu problem

railfan
By railfan
in Troubleshooting
 Share
Posted

did you connect every cable?

sounds like you forgot the 4/8 Pin PSU cable

CPU: Ryzen 3700X VGA: RX 5700 8G RAM: 32GB 3200MT/s DDR4 Motherboard: B450 Aorus Pro

Storage: 2x1TB Crucial P2, 1TB Crucial MX500, 36TB NAS Cooling: Custom Loop 360mm & 280mm

PSU: Super Flower Golden Green HX 650W Case: Phanteks Enthoo Luxe

Link to comment
https://linustechtips.com/topic/328705-new-psu-problem/#findComment-4461878
Share on other sites
Link to post
Share on other sites
Posted

by 4/8 pin did you mean cpu? my mobo has a 4 pin and it is plugged in

hm, strange...

check if the pins themself aren't pushed out of the connector, had this problem before and I thought my PSU was broken

CPU: Ryzen 3700X VGA: RX 5700 8G RAM: 32GB 3200MT/s DDR4 Motherboard: B450 Aorus Pro

Storage: 2x1TB Crucial P2, 1TB Crucial MX500, 36TB NAS Cooling: Custom Loop 360mm & 280mm

PSU: Super Flower Golden Green HX 650W Case: Phanteks Enthoo Luxe

Link to comment
https://linustechtips.com/topic/328705-new-psu-problem/#findComment-4470760
Share on other sites
Link to post
Share on other sites
Posted

Do you have some kind of status led or beep code you can read out? thoes often help a bunch! Ususally if you mobo does not have a post code readout there is a speaker you can plug in where the front io like power button etc are plugged in... check weather you have one of those the codes can be decoded with the manual. 

Also is your old psu broken? if you just replaced it and it still works, try if the computer starts up with your old or even another psu, which you might have laying around.

Link to comment
https://linustechtips.com/topic/328705-new-psu-problem/#findComment-4471283
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Do you have some kind of status led or beep code you can read out? thoes often help a bunch! Ususally if you mobo does not have a post code readout there is a speaker you can plug in where the front io like power button etc are plugged in... check weather you have one of those the codes can be decoded with the manual. 

Also is your old psu broken? if you just replaced it and it still works, try if the computer starts up with your old or even another psu, which you might have laying around.

i tried it again with my old psu, and it workes just fine. My monitors speakers did nothing, and my mobo doesnt have any staus leds/beeps
Link to comment
https://linustechtips.com/topic/328705-new-psu-problem/#findComment-4518528
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×