Jump to content

Computer builder cuts anonymous

calarahil
By calarahil
in General Discussion
 Share
Posted
  • Author

Worst cut I've received from PC building/modding/etc.

 

Slid a razor knife through the tip/side of my thumb. About an inch long cut and deep enough to nearly scraped the underside of the nail. Several stitches to hold it back together and stop it from being permanently forked ;) I'm sure I could scrounge up a picture or two but I don't think it's necessary there's no need for a gore thread. Nothing like telling the doctor, when they have time to see you that you need stitches to have them roll their eyes then ask to see it. Then only to say with heavy emphasis OH yes, you DEFINITELY need stitches.

 

I do a lot of work with glass so cutting myself is a fairly frequent occurrence. More of a slight annoyance than anything.

 

I kind of did that today I was cutting the long end off some cable ties. Scissor got me pretty good :X but it'll go away. 

 

Still though battle wound though from modding sounds like the end result better have been worth it :P

Link to post
Share on other sites
Posted

When I saw building my case, I was working on a radiator stand and the hole saw kicked... ended up in the ER.  Good times, lol.  Made the case cost skyrocket though, lol.

 

I have a pretty awesome picture but it's pretty gorey.

3930k | RIVBE | 32GB Dominator Plat. | Titan XP | Intel 750 1.6TB | Mellanox 10Gb NIC | AX1200i 

Custom TJ07 | 2xD5 pumps | EK Supremacy EVO | EK Titan XP | EK RIVBE Block | Cu Tubing | 25x120mm Rad

Samsung U28D590D 4K | Leopold Otaku w/Browns | Corsair M65 | Corsair SP2500 | Sennheiser HD595

Link to post
Share on other sites
Posted

I kind of did that today I was cutting the long end off some cable ties. Scissor got me pretty good :X but it'll go away. 

 

Still though battle wound though from modding sounds like the end result better have been worth it :P

 

Here, next time you need to use scissors try these :) They will protect your fingers ;)

 

boy-with-scissors-lg.jpg

You keep using that word. I do not think it means what you think it means.
Users cannot, and will not securely manage key material. Most users can't and the ones that can, wont.

Ask me about Bitcoin, Litecoin, Crypto-Currencies, and/or Mining them.

Link to post
Share on other sites
Posted
  • Author

When I saw building my case, I was working on a radiator stand and the hole saw slipped... ended up in the ER.  Good times, lol.  Made the case cost skyrocket though, lol.

 

I have a pretty awesome picture but it's pretty gorey.

Dear god what did you do!!!!!! 

Link to post
Share on other sites
Posted
  • Author

Here, next time you need to use scissors try these :) They will protect your fingers ;)

 

boy-with-scissors-lg.jpg

ahah funny man it was zip ties that I had to take off and they were already cut and I was moving it through the wire and not the block square. 

Link to post
Share on other sites
Posted

was it this one? 

 

*snip*

 

or this one I had this one

 

*snip*

 

 

I actually owned both of those. The flower one I had the copper\aluminium variant and the other was the exact same one. Thanks for the memories!   :wub:

Asus Gryphon w/Thermal Armor / Intel i5 4670K / Corsair Vengeance Pro 8GB / Asus ROG Matrix 7970 Platinum / Samsung 830 / Seagate Barracuda

Corsair AX860 / Corsiar 350D / Corsair H100i / Windows 8 Pro


Link to post
Share on other sites
Posted

Dear god what did you do!!!!!! 

 

Sliced my ankle open...

 

4.5" holesaws have a wicked kick

 

Gore, click at your own discression 

http://cdn.overclock.net/6/6c/500x1000px-LL-6c863d6a_198659_4217636730648_689720274_n.jpeg

3930k | RIVBE | 32GB Dominator Plat. | Titan XP | Intel 750 1.6TB | Mellanox 10Gb NIC | AX1200i 

Custom TJ07 | 2xD5 pumps | EK Supremacy EVO | EK Titan XP | EK RIVBE Block | Cu Tubing | 25x120mm Rad

Samsung U28D590D 4K | Leopold Otaku w/Browns | Corsair M65 | Corsair SP2500 | Sennheiser HD595

Link to post
Share on other sites
Posted
  • Author

I actually owned both of those. The flower one I had the copper\aluminium variant and the other was the exact same one. Thanks for the memories!   :wub:

haha! nice. I never had the smaller one. Now to test your memory do you remember the cooler master evo of the time. 

FG-000-AR_400.jpg

Link to post
Share on other sites
Posted
  • Author

Sliced my ankle open...

 

4.5" holesaws have a wicked kick

 

Gore, click at your own discression 

http://cdn.overclock.net/6/6c/500x1000px-LL-6c863d6a_198659_4217636730648_689720274_n.jpeg

GD man :P so you were sawing a part and it slid off and went on your ankle jeez

Link to post
Share on other sites
Posted

GD man :P so you were sawing a part and it slid off and went on your ankle jeez

 

Nope, definitely didn't slip.  It was spinning, it caught, kicked hard enough to jump out of the hole, grazed the ankle.

 

For those that haven't seen a hole saw:

 

119519a0-03f1-4db6-81e9-1ecaf55fa870_300

3930k | RIVBE | 32GB Dominator Plat. | Titan XP | Intel 750 1.6TB | Mellanox 10Gb NIC | AX1200i 

Custom TJ07 | 2xD5 pumps | EK Supremacy EVO | EK Titan XP | EK RIVBE Block | Cu Tubing | 25x120mm Rad

Samsung U28D590D 4K | Leopold Otaku w/Browns | Corsair M65 | Corsair SP2500 | Sennheiser HD595

Link to post
Share on other sites
Posted

Surprisingly didn't hurt at all... the healing hurt way more, lol.

3930k | RIVBE | 32GB Dominator Plat. | Titan XP | Intel 750 1.6TB | Mellanox 10Gb NIC | AX1200i 

Custom TJ07 | 2xD5 pumps | EK Supremacy EVO | EK Titan XP | EK RIVBE Block | Cu Tubing | 25x120mm Rad

Samsung U28D590D 4K | Leopold Otaku w/Browns | Corsair M65 | Corsair SP2500 | Sennheiser HD595

Link to post
Share on other sites
Posted

haha! nice. I never had the smaller one. Now to test your memory do you remember the cooler master evo of the time. 

 

 

*snip*

 

Yea that looks familiar. Is that the one with the crappy plastic push pin mounts for Intel? An old coworker gave me one similar to that one but it had one push pin that would not push down correctly...what the heck did I do with that thing? I probably tossed it. The last few years I have been using a Cooler Master V8. On my current work in progress build, i'll be going H100i. For old times sake, I'm sure I will get bodily harm on the rad fins. 

Asus Gryphon w/Thermal Armor / Intel i5 4670K / Corsair Vengeance Pro 8GB / Asus ROG Matrix 7970 Platinum / Samsung 830 / Seagate Barracuda

Corsair AX860 / Corsiar 350D / Corsair H100i / Windows 8 Pro


Link to post
Share on other sites
Posted
  • Author

Yea that looks familiar. Is that the one with the crappy plastic push pin mounts for Intel? An old coworker gave me one similar to that one but it had one push pin that would not push down correctly...what the heck did I do with that thing? I probably tossed it. The last few years I have been using a Cooler Master V8. On my current work in progress build, i'll be going H100i. For old times sake, I'm sure I will get bodily harm on the rad fins. 

actually a h100i is as safe as it gets. Also invest in solid fans over the 120L fans they make a weird noise idk I don't like stock fans with coolers to being with. And actually it was to my knowledge for both but was mainly fit for the socket 939. 

Link to post
Share on other sites
Posted

did you ever finish the mod or did you have someone finish for you?

 

I finished it, lol.  Suppose to be picking the case up from the powder coater this week

3930k | RIVBE | 32GB Dominator Plat. | Titan XP | Intel 750 1.6TB | Mellanox 10Gb NIC | AX1200i 

Custom TJ07 | 2xD5 pumps | EK Supremacy EVO | EK Titan XP | EK RIVBE Block | Cu Tubing | 25x120mm Rad

Samsung U28D590D 4K | Leopold Otaku w/Browns | Corsair M65 | Corsair SP2500 | Sennheiser HD595

Link to post
Share on other sites
Posted

actually a h100i is as safe as it gets. Also invest in solid fans over the 120L fans they make a weird noise idk I don't like stock fans with coolers to being with. And actually it was to my knowledge for both but was mainly fit for the socket 939. 

 

Yea I have SP120's (Performance) to replace the stock fans. However I bought them before the PWM versions were available. I'll most likely use the step down voltage adapter to keep noise manageable. 

Asus Gryphon w/Thermal Armor / Intel i5 4670K / Corsair Vengeance Pro 8GB / Asus ROG Matrix 7970 Platinum / Samsung 830 / Seagate Barracuda

Corsair AX860 / Corsiar 350D / Corsair H100i / Windows 8 Pro


Link to post
Share on other sites
Posted
  • Author

Yea I have SP120's (Performance) to replace the stock fans. However I bought them before the PWM versions were available. I'll most likely use the step down voltage adapter to keep noise manageable. 

 

I gotcha. I have the quiet editions and I leave the voltage adapter off imo quiet enough. 

Link to post
Share on other sites
Posted

Wires, all the time, lacerations, blood, pain :(

Ex Intel Response Squad Member


/FAQ And Guide - CPU Choice/ | /How To Effectively Use The Search Function/


 /How A CPU Works/  | /Windows 7 Customization/ | /CODE Keyboard Review/

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing General Discussion

×