Jump to content

how do i know?

Gentlekatt

Hello guys how do i know if my psu will fit this case and can any psu fit any mid tower case?

Link to comment
Share on other sites

Link to post
Share on other sites

You need to know length of psu and max supported length that case support.

Link to comment
Share on other sites

Link to post
Share on other sites

Hello guys how do i know if my psu will fit this case and can any psu fit any mid tower case?

Pretty much all power supplies are the same size with exception of a few higher end, higher wattage ones

X-10 - 7980XE - Gigabyte Aorous Gaming 9 - 128GB GSkill TridentZ RGB - SLI Asus GTX 1080 TI Strix
Easy Desk GuideMalware Removal Guide - New mobo, Same OS Guide

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Pretty much all power supplies are the same size with exception of a few higher end, higher wattage ones

 

 

You need to know length of psu and max supported length that case support.

oh i see

Link to comment
Share on other sites

Link to post
Share on other sites

Phanteks Enthoo Pro it doesnt say anything about psu when i read specs of it

Link to comment
Share on other sites

Link to post
Share on other sites

Phanteks Enthoo Pro it doesnt say anything about psu when i read specs of it

You wont have any problem fitting 99% of psu's in that case.

Link to comment
Share on other sites

Link to post
Share on other sites

If the PSU you plan to use is less than 1000W, it will definitely fit.

 

PSU under 1000W are usually ATX form factor, up to  190mm.

 

And Enthoo Pro can fit any PSU as long as you dont use bottom mounted fan on the first slot near the PSU.

CPU: i7 3770K | MB: EVGA Z77 FTW | RAM: HyperX Savage 2400Mhz 16GB | GPU: R9 280X Toxic | Cooler: Scythe Fuma | PSU: CoolerMaster B600

SSD: Crucial MX300 525GB | HDD: Seagate Barracuda 7200.12 500GB - Toshiba DT01ACA300 3TB

Link to comment
Share on other sites

Link to post
Share on other sites

You wont have any problem fitting 99% of psu's in that case.

 

 

If the PSU you plan to use is less than 1000W, it will definitely fit.

 

PSU under 1000W are usually ATX form factor, up to  190mm.

 

And Enthoo Pro can fit any PSU as long as you dont use bottom mounted fan on the first slot near the PSU.

So i want to fit 1000 w psu what do i need to look at so i could fit it

Link to comment
Share on other sites

Link to post
Share on other sites

Hello guys how do i know if my psu will fit this case and can any psu fit any mid tower case?

Basicaly if an issue is not made of its size (longer/shorter than...) it will be pretty much a standard sized PSU and will fit 99% of cases .  

 

(IHHO)Were it will be an issue is for some Mini builds and for some where it is a tighter than average install, but generally you can assume pretty much all PSUs will fit pretty much all cases (unless and untill you ger esoteric).  Clearance issues for certain set-ups~you can only suck it and see ,with not a little help of tons of Googling looking at reviews/issues,seeing if anyone else has the same sort of set up as yourself ,and they're experiences.  Generally I wouldn't worry,or even spare a thought, unless you're trying to use the bottom slot or some such, or 'jam' an extra fan in the bottom.

 Two motoes to live by   "Sometimes there are no shortcuts"

                                           "This too shall pass"

Link to comment
Share on other sites

Link to post
Share on other sites

So i want to fit 1000 w psu what do i need to look at so i could fit it

 

I'm pretty sure that the case you want can fit as long of a PSU as you want.

Link to comment
Share on other sites

Link to post
Share on other sites

So i want to fit 1000 w psu what do i need to look at so i could fit it

 

You can fit it no problems. Limiting occurs when you have fan installed on the bottom of the case.

 

No fan = no limit

CPU: i7 3770K | MB: EVGA Z77 FTW | RAM: HyperX Savage 2400Mhz 16GB | GPU: R9 280X Toxic | Cooler: Scythe Fuma | PSU: CoolerMaster B600

SSD: Crucial MX300 525GB | HDD: Seagate Barracuda 7200.12 500GB - Toshiba DT01ACA300 3TB

Link to comment
Share on other sites

Link to post
Share on other sites

 

On topic, aye, there is no limit to how long of a PSU you can with without a fan.

 

+1 for the music

CPU: i7 3770K | MB: EVGA Z77 FTW | RAM: HyperX Savage 2400Mhz 16GB | GPU: R9 280X Toxic | Cooler: Scythe Fuma | PSU: CoolerMaster B600

SSD: Crucial MX300 525GB | HDD: Seagate Barracuda 7200.12 500GB - Toshiba DT01ACA300 3TB

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×