Cryorig H7

[A Banana :D]

Can someone let me know if a Cryorig H7 would fit on a LGA 775 socket. Cryorig claims that it only supports LGA 115X, but HiTechLegion says it supports all intel sockets. And also on the mounting bracket there is two extra slots for what could be 775 and 2011. 

 

http://www.newegg.com/Product/Product.aspx?Item=9SIA4UF2DZ6565

http://www.hitechlegion.com/reviews/cooling/heatsinks/42980-cryorig-h7-universal-cpu-cooler-review

 

http://proclockers.com/sites/default/files/Cryorig%20H7%20(16).JPG

 

Thanks!

[A Banana :D]

there is the video with the mounting im talking about 

 

[WoodenMarker]

I'm not sure. You might want to contact Cryorig for a quote.

[A Banana :D]

I'm not sure. You might want to contact Cryorig for a quote.

Thanks for the reply. I dont know if i can contact them however. I'll give it a shot though!

[WoodenMarker]

Thanks for the reply. I dont know if i can contact them however. I'll give it a shot though!

There should be a button to leave a message at the bottom right of their page: http://www.cryorig.com/

[Steve CR]

Hello Banana!

A Banana , on 09 Feb 2015 - 05:14 AM, said:

Can someone let me know if a Cryorig H7 would fit on a LGA 775 socket. Cryorig claims that it only supports LGA 115X, but HiTechLegion says it supports all intel sockets. And also on the mounting bracket there is two extra slots for what could be 775 and 2011. 

 

http://www.newegg.com/Product/Product.aspx?Item=9SIA4UF2DZ6565

http://www.hitechlegion.com/reviews/cooling/heatsinks/42980-cryorig-h7-universal-cpu-cooler-review

 

http://proclockers.com/sites/default/files/Cryorig%20H7%20(16).JPG

 

Thanks!

 

Yes and no.  We left mounting holes on the backplate of the X-Bar system for 1366 and 75, but that was for giving the backplate more versatility in the future.  The H7 itself is not 775 or 1366 compatible right out of the box.  This was a trade off we had to accept to get AMD and 115x mounting on the X-Bar.  

 

However, with that said the H7 is compatible with the MultiSeg mounting kit from the R1 Series, which supports pretty much every platform since the 775.  We are still debating on wither or not to sell the MultiSeg as a separate kit, but chances are the price of the H7+ MultiSeg Mounting will cost you more than the H5 which already has 775 support.  So if you do insist on going with the H7+ MultiSeg you can private message me or write to support@cryorig.com.  There they will resolve your issue.  But unless you have some space limitation issue, I would suggest you to get the H5 which is only around 10USD more expensive than the H7, and it'll give you more mileage performance wise for the money.

 

 

BR
CRYORIG AF41

[A Banana :D]

Hello Banana!

A Banana , on 09 Feb 2015 - 05:14 AM, said:

 

Yes and no.  We left mounting holes on the backplate of the X-Bar system for 1366 and 75, but that was for giving the backplate more versatility in the future.  The H7 itself is not 775 or 1366 compatible right out of the box.  This was a trade off we had to accept to get AMD and 115x mounting on the X-Bar.  

 

However, with that said the H7 is compatible with the MultiSeg mounting kit from the R1 Series, which supports pretty much every platform since the 775.  We are still debating on wither or not to sell the MultiSeg as a separate kit, but chances are the price of the H7+ MultiSeg Mounting will cost you more than the H5 which already has 775 support.  So if you do insist on going with the H7+ MultiSeg you can private message me or write to support@cryorig.com.  There they will resolve your issue.  But unless you have some space limitation issue, I would suggest you to get the H5 which is only around 10USD more expensive than the H7, and it'll give you more mileage performance wise for the money.

 

 

BR

CRYORIG AF41

Thank you!! However the H5 is a little too tall for me at 160mm and the Cryorig C1 is too expensive. Im a little stuck here as you can see . 

[Steve CR]

Thank you!! However the H5 is a little too tall for me at 160mm and the Cryorig C1 is too expensive. Im a little stuck here as you can see . 

Hm.... if you want I can hook you up with a multiSeg kit for the H7.  But they'll charge the cost of materials.  

[Ostwind]

-bloop-

Wow I had no idea that CR was on LTT, you should ask for the Industry affiliate tag so people know. I have the H5 and I love it, I can't wait to see what else you guys bring out.

[Steve CR]

Thanks for the reminder, I think I'll ask for one!  

Also, you can try the R1 if you're into that type of extreme cooling stuff!

[Spev]

Thanks for the reply. I dont know if i can contact them however. I'll give it a shot though!

Don't bother with their twitter or facebook they don't reply to anyone. Try to find a customer support email.

[Steve CR]

Don't bother with their twitter or facebook they don't reply to anyone. Try to find a customer support email.

Our Facebook and Twitter accounts exist for different reasons.  Of course it's always best to write in to support@cryorig.com first if you need product support.  The support team naturally will handle support issues more efficiently.  

[A Banana :D]

Thanks for the reminder, I think I'll ask for one!  

Also, you can try the R1 if you're into that type of extreme cooling stuff!

I have a R1 Universal myself! Its amazing. Dead quiet, killer looks, and jaw dropping performance. As for the multiseg for the H7, I'll get back to you on that but this has def been a +1 for Cryorig for me!