Help OC CPU

[consoleconvergence2pc]

I have oc'd my i5 4690k synced all cores to 46 so far at 1.25v and tested using aida64 for about an hour atm max temps 73 degrees and lowest was 68.

I want to push it to the max to see what i could get and put 47 all cores at the same voltage and it crashed. should i now increase voltage ? or just leave at 4.6ghz and try lower the voltage now? BTW im using a h80i cooler.

[Kinda Bottlenecked]

If you're comfortable with your temps i guess you could push it more

 

My i5 4670k could only get 4.1ghz at 1.25v so i left it at 4.1ghz as i didn't want my cpu to heat up all the time

[Eniqmatic]

Up to you, question is, do you want slightly higher clocks and higher temps with the increase voltage, or are you happy where your at with potential of lowering the voltage a little bit lowering your temps?

[consoleconvergence2pc]

Up to you, question is, do you want slightly higher clocks and higher temps with the increase voltage, or are you happy where your at with potential of lowering the voltage a little bit lowering your temps?

i tried prime95 lowered voltage to 1.23 at 4.6ghz and crashed 2min in but max temps was 70 

[Eniqmatic]

1.25 is possibly your best voltage at those settings, or tone it down a little if you want to lower temperatures.

[consoleconvergence2pc]

1.25 is possibly your best voltage at those settings, or tone it down a little if you want to lower temperatures.

im on 1.24v now at 4.6ghz 30min in still running prime95 no crashes max temp 75 degrees 

[Eniqmatic]

Need to run it for a good while to actually verify, couple of hours at the very minimum.