Jump to content

what pump setting?

spwath
By spwath
in Custom Loop and Exotic Cooling
 Share
Posted

Getting d5 pump, can I set it on 1 for dual 180 rad and CPU block?

n0ah1897, on 05 Mar 2014 - 2:08 PM, said:  "Computers are like girls. It's whats in the inside that matters.  I don't know about you, but I like my girls like I like my cases. Just as beautiful on the inside as the outside."

Link to comment
https://linustechtips.com/topic/300730-what-pump-setting/
Share on other sites
Link to post
Share on other sites
Posted

Getting d5 pump, can I set it on 1 for dual 180 rad and CPU block?

 

Yep that's a good choice as long as you don't have very high restriction in your waterblocks it should be more than adequate, the only difference between high and low settings is only around a few degrees at times.

Updated Modding FAQ

Link to comment
https://linustechtips.com/topic/300730-what-pump-setting/#findComment-4086286
Share on other sites
Link to post
Share on other sites
Posted

I always keep my D5 pump on 3. At most, 4. 1 should be fine as long as there isn't that much restriction. Probably 2 would be better.

Case Phanteks Enthoo Evolv ITX | Motherboard Asus ROG Strix Z270i | CPU Intel i7-7700K | RAM Team Vulcan 16GB DDR4 | GPU Geforce GTX 1080 Ti | Storage Crucial MX300 1TB M.2 | PSU Corsair RM750x

Link to comment
https://linustechtips.com/topic/300730-what-pump-setting/#findComment-4086354
Share on other sites
Link to post
Share on other sites
Posted

We don't know, you need to stress test your loop with IBT AVX or similar and see which pump setting nets you the best result.

Spoiler

Chernobyl

AMD FX8350 @ 5GHz | Asus Sabretooth 990FX R2 | 16GB HyperX Savage @1950mhz CL9 | 120GB Kingston SSDNow

EK AMD LTX CSQ | XSPC D5 Dual Bay | Alphacool NexXxoS XT45 240mm & Coolgate Triple HD360

 

Spoiler

Kraken

Intel i5 4670K Bare Die 4.9GHz | ASUS Maximus VII Ranger Z97 | 16GB HyperX Savage 2400MHz | Samsung EVO 250GB

EK Supremecy EVO & EK-MOSFET M7G  | Dual 360mm Rads | Primochill CTR Phase II w/D5 | MSI GTX970 1670MHz/8000MHz

 

Graphic Design Student & Overall Nerd

 

Link to comment
https://linustechtips.com/topic/300730-what-pump-setting/#findComment-4096334
Share on other sites
Link to post
Share on other sites
Posted

Getting d5 pump, can I set it on 1 for dual 180 rad and CPU block?

 

Yes,however I advocate running it at full speed and dialling it back if there a noise issue.

I set to the highest acceptable noise emission and leave it.

SR-2-2x X5650 Xeons-3x 670 FTW-1x 120Gb Force GT-1x 240Gb Force GT-1tb WD Green-12Gb Dom GT 1866-Platimax 1500w-2x HK3-2xD5-24v controller-3x RX 480's-3x NiBlk HK GPU blocks-Koolance tops-BP res-15x SP120's-Little Devil V8.

 

 

Link to comment
https://linustechtips.com/topic/300730-what-pump-setting/#findComment-4097781
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×