New cooling...

[STYCHE!]

I need a new system for cooling.

They need to be extremely effective for hard sore gaming and  rendering.

Thanks for the advice, this is the first place i come when i have questions.

 

*edit*

I run a(n)

i5 4670k (i have no plans to overclock)

2x gtx 650's

on an asrock z87 extreme 4

with 12 gb of corsair XMS3 DDR3 ram

the hard drive shouldn't matter.

Thanks!

[WoodenMarker]

Please list the rest of your including your case and cooling config.

Are you not satisfied with your current cooling?

[STYCHE!]

My case is just a standard Mid gaming tower idk the name as it was only $50 it has 4 case fans. 2 On the front and 2 on the back. I have the stock fan for the processor on it that's all that i can think of. The fan cases are all 120mm. 

Thx.

[kkpatel87]

I need a new system for cooling.

They need to be extremely effective for hard sore gaming and  rendering.

Thanks for the advice, this is the first place i come when i have questions.

 

*edit*

I run a(n)

i5 4670k (i have no plans to overclock)

2x gtx 650's

on an asrock z87 extreme 4

with 12 gb of corsair XMS3 DDR3 ram

the hard drive shouldn't matter.

Thanks!

 

What is the current motherboard as well?

 

Whoops just saw it...i would go with an H440...it has plenty of airflow...also i would route all of the harnesses behind the motherboard tray to increase the amount of area that area can flow through.

[WoodenMarker]

My case is just a standard Mid gaming tower idk the name as it was only $50 it has 4 case fans. 2 On the front and 2 on the back. I have the stock fan for the processor on it that's all that i can think of. The fan cases are all 120mm. 

Thx.

So why get new cooling? Are you current temps unsatisfactory?

You need to quote a post or tag a member or else they won't get a notification you replied to them.

[STYCHE!]

an asrock z87 extreme 4

it was in the original statement

So why get new cooling? Are you current temps unsatisfactory?

You need to quote a post or tag a member or else they won't get a notification you replied to them.

Yes the cooling is horrible the cpu reaches temperatures upwards of 90*

What is the current motherboard as well?

Whoops just saw it...i would go with an H440...it has plenty of airflow...also i would route all of the harnesses behind the motherboard tray to increase the amount of area that area can flow through.

ok what company is the H440 from?

[kkpatel87]

ok what company is the H440 from?

 

NZXT...

 

Yes the cooling is horrible the cpu reaches temperatures upwards of 90* 

 

...Although this makes it sound like you need a better cpu cooler or the current cooler was installed incorrectly.

 

I would remove the stock cooler, remove all the thermal grease with 99% alcohol and then reapply new thermal grease and re-install. After about 2-3 hours check the temps at idle and at capacity.

[STYCHE!]

NZXT...

 

 

...Although this makes it sound like you need a better cpu cooler or the current cooler was installed incorrectly.

 

I would remove the stock cooler, remove all the thermal grease with 99% alcohol and then reapply new thermal grease and re-install. After about 2-3 hours check the temps at idle and at capacity.

Yeah, i just needed a new Cpu cooler. But i'll try to remove the paste and re-apply but if that doesn't work what fan would you recommend?

[WoodenMarker]

Yes the cooling is horrible the cpu reaches temperatures upwards of 90* 

Where are you shopping/located? Budget?

Is there any indication as to what case you have? If not, can you give us a picture in case we can recognize it?

[kkpatel87]

Yeah, i just needed a new Cpu cooler. But i'll try to remove the paste and re-apply but if that doesn't work what fan would you recommend?

Depends on your budget and current case dimensions.

[ace101.]

I had the same temperature before with my stock CPU Cooler while Rendering. You just need to replace your CPU Cooler. Cooler Master Hyper 212 Evo is enough to lower your temperature to 60C

Yeah, i just needed a new Cpu cooler. But i'll try to remove the paste and re-apply but if that doesn't work what fan would you recommend?

Re-applying the paste is a waste of time it will give you the same result. Just replace your CPU Cooler.

[LogicalDrm]

Since you aren't gonna OC 212 Evo should be enough. Unless your case has some height restrictions. Then we need to look at something smaller than 212.