Drain valve

[FreezeFlyte]

I'm looking to incorporate a drain valve in a new loop im planning to build. Here is the valve I'm looking at currently to use: http://www.frozencpu.com/products/20912/koo-373/Koolance_G14_Brass_Inline_Drain_Valve_Fitting_-_4_Port_VLV-XUTX4B.html?tl=g30c101s460&id=VryywPHK&mv_pc=7867

Now I can't seem to find much on it but I was wondering if I were to use it should I use a valve like this: http://www.frozencpu.com/products/14595/ex-tub-1034/Bitspower_G14_Mini_Valve_-_Black_Sparkle_BP-MVV-BKBK.html?tl=g30c101s460&id=VryywPHK&mv_pc=8526

 

before the nozzle to prevent it from leaking? I'll end up using a adapter with the valve but thats not a problem. Thanks!

[ForsakenLive]

Get the Bitspower mini tap, the end is threaded and you can use a plug on it for extra safety (same plugs there are on radiators, for the ports you are not using).

[FreezeFlyte]

Get the Bitspower mini tap, the end is threaded and you can use a plug on it for extra safety (same plugs there are on radiators, for the ports you are not using).

I can't find anything by Bitspower called the mini tap.

[ForsakenLive]

I can't find anything by Bitspower called the mini tap.

I call it mini tap! Sorry!

It's the valve you linked haha.

[FreezeFlyte]

I call it mini tap! Sorry!

It's the valve you linked haha.

That makes more sense. Thanks!