Replace this HDD?

[Gibster]

I've been dealing with this really loud noise in my PC since I've bought it, my primary driver other than my SSD makes this unbearable sound when writing in particular I think. I've recorded the sound do you guys think it's time to claim warranty? 

 

http://vocaroo.com/i/s0uzpPSlWkv1

[Godlygamer23]

Is the hard drive fully mounted in the location?

[Gibster]

Is the hard drive fully mounted in the location?

As in like in the case? Yes, I even screwed it to the drive mount.

[Gibster]

As in like in the case? Yes, I even screwed it to the drive mount.

Note: This sound doesn't happen all the time usually upon bootup and then the odd time after that.

[Godlygamer23]

What happens if you push on it lightly when this noise occurs?

[LolSalad]

I've been dealing with this really loud noise in my PC since I've bought it, my primary driver other than my SSD makes this unbearable sound when writing in particular I think. I've recorded the sound do you guys think it's time to claim warranty? 

 

http://vocaroo.com/i/s0uzpPSlWkv1

Hey man i suggest you backup your stuff now just in case, could be anything, you never know.

[The Pizza Thief]

Agree, get yourself a complete backup because it may fail soon.

[Gibster]

Problem solved! So I opened the case to see what the problem was as Godlygamer23 suggested to touch the drive... The problem was in fact the latches the Corsair Carbide 500r uses in the expansion bays. 

What was happening was the tip of that was jumping up and down so fast it was creating that loud noise you heard in the recording, a few pieces of paper sorted the problem right out! Thanks for the replies!

[MLG Doge]

Problem solved! So I opened the case to see what the problem was as Godlygamer23 suggested to touch the drive... The problem was in fact the latches the Corsair Carbide 500r uses in the expansion bays.

What was happening was the tip of that was jumping up and down so fast it was creating that loud noise you heard in the recording, a few pieces of paper sorted the problem right out! Thanks for the replies!

I hope you didn't mount the drive in a 5.25" rather than a 3.5". I doubt that would a caused problems though.

(I don't quite understand what the problem was)