fx-6300 voltages

[PuNkPoEtS]

i have gotten the 6300 and have recently installed it in my system and am trying to overclock it and i can no find the stock volts at all. im currently running it at 3.9ghz with 1.332v

 

i have been searching all over the net and no one has the stock volts. the reason im asking is that im running at 58 Celsius with a cooler master T4 cooler with nf-f12 in p/p 

[Godlygamer23]

What motherboard do you have?

[PuNkPoEtS]

sabertooth 990fx r2.0

[Godlygamer23]

Does your motherboard BIOS look like this? http://www.ocaholic.ch/modules/xcgal/albums/userpics/ASUSSabertoothR20/normal_ASUSSabertoothR20_001.jpg

[PuNkPoEtS]

yeah it does but i have changed it to the advanced mode

 

http://www.legitreviews.com/article/1639/4/

[Godlygamer23]

In AI Tweaker, if you scroll down, you should find your CPU voltages. If you already know that, I'm not sure what you're asking.

[PuNkPoEtS]

im trying to find out the stock voltages for the cpu

[Godlygamer23]

The stock voltages are here: http://www.cpu-world.com/CPUs/Bulldozer/AMD-FX-Series%20FX-6350.html

[PuNkPoEtS]

well its stating that @3800 it needs 1.4125V i currently have mine at 3900 and its only on 1.332v. i have already seen that and thats the reason i have come to the forums about this as i would like to get the best oc with this chip. wiht my 4100 i got 4.2 with 1.43v

[Godlygamer23]

The best OC with the chip will be in line with the silicon lottery. Just keeping increase clocks until your chip becomes unstable. When that occurs, up the voltage slightly, stressing it along the way as well.

[PuNkPoEtS]

thanks godly

[Godlygamer23]

No prob.

[Godlygamer23]

If you suffer from any kind of Vdroop, go into Digi+ Power Control and increase Load Line Calibration. This will combat the Vdroop. Start off with low, and keep working your way up.