New Case Design

[WarpedVisionPC]

I wanted to post up a new case design we finished not too long ago and get feedback from serious builders and modders of what they think about the layout. Im looking for the good, the bad and even the ugly as this case is the beginning of a passion project, so tell me what you think and if you would build in it.

 

Design Specs-

Motherboard - up to E-ATX

9x 120 Fans or 3x Triple radiator

2x up to 250mm Resivoir next to motherboard pre drilled

Rear Mounting PSU for better cable managment and front side air flow

8x Rear mounted HDD's for better case,cable managment and front air flow and space

2x duel bay 5.25 side ways mount

 

 

 

 

[Mateyyy]

Fascinating...

 

I mean, I'm anything but a modder, but it looks quite cool

[Thorium19]

Does it only support 120mm fans? Adding support for 140mm fans would certainly be a big advantage, especially if you can fit two 420mm radiators. Also, will it be offered in different colours? As from the looks of it large portions are acrylic.

Overall it looks fairly nice. What thickness rads can it fit if there are 3*360mm rads in it? Just curious.

I'm no modder, or even a serious builder, but I would be tempted to get one if I was in the market for a large case like this, I'd certainly put it into consideration.

The use of putting to PSU and drives on the opposite side is nice to see, I like that trend at the moment, makes life a lot easier with cable routing etc.

[TinoXtreme]

I like the looks, I think a PC with loads of lightning will look very nice in this case. To really give some good feedback, you have to give us some more info about the case.

[Jeroendedoem]

I would like to see some dustfilters at the top.

[WarpedVisionPC]

Well this will in the future be offered in different colors as builders like different color scemes depending on there build that there trying to go for with sleaving color and lighting. We will have a larger model that will become available that will allow 140's and thicker radiators but currently this one offers 360mm. The whole case is acrylic though aside from the black mat material being used as gloss black gets tons of finger prints but will also be offered to builders and clients getting a build done by us.

[Thorium19]

Well this will in the future be offered in different colors as builders like different color scemes depending on there build that there trying to go for with sleaving color and lighting. We will have a larger model that will become available that will allow 140's and thicker radiators but currently this one offers 360mm. The whole case is acrylic though aside from the black mat material being used as gloss black gets tons of finger prints but will also be offered to builders and clients getting a build done by us.

 

That's good, having two sizes and different colours to choose from certainly makes it a more appealing option than a lot of the competition. 

[WarpedVisionPC]

Well thats where we are set completely apart from everyone else, using acrylic coming up with a custom design,layout and more is such a great blank canvis. We want to be able to design cases that people have only thought about or were forced to mod into there needs. We also want to be able to do client builds for folks looking for something from a small micro build to the most extreme one can imagine, why shouldnt you be able to have a custom pc that looks like a million bucks without spending that right. We are passionate about what we do, were not into selling our brand for excessive ammounts of money but selling the passion that went into each design and build for people, the fact is alienware doesnt mean anything or stand for anything anymore.

[HellaflushMcSwaggins]

Where do I sign?If you kickstart this I might back it, it looks really awesome.I need more of this in my life

[WarpedVisionPC]

Well i partnered with frozenQ PC Mods and we did launch a campaign on the gogo and currently trying to raise start up for the custom pc end and to expand the frozenQ end to form waroed vision pc. I cant post a link here per the rules of the forums until i recieve propper permission from linus and his crew which im waiting on. If you google or stop by the gogo you will find us quickly. We are also using part of the proceeds to build and gift macines to donate games cancer foundation also to give back to a great cause.

[raultherabbit]

I like it.  It's beautiful and minimal and you can see a lot of open space for your own mods and custom stuff.

 

120/140mm fan mounts instead of just 120.  An additional 120/140 in the rear by the i/o, as well.  Also the plexi will there be color options?  I'd love a purple choice.  Is there going to be a usb 3.0 header for the front?  I would also like to see a specific spot to mount a pump/res combo.  dust filters are a big thing these days. pre drilled holes for leds around the i/o? or just include them.

 

I just saw you're going to have a larger version supporting 140mm fans.  I guess that knocks some of my questions/suggestions out.  I'd love to see the larger version when that's ready to show.

[HellaflushMcSwaggins]

Well i partnered with frozenQ PC Mods and we did launch a campaign on the gogo and currently trying to raise start up for the custom pc end and to expand the frozenQ end to form waroed vision pc. I cant post a link here per the rules of the forums until i recieve propper permission from linus and his crew which im waiting on. If you google or stop by the gogo you will find us quickly. We are also using part of the proceeds to build and gift macines to donate games cancer foundation also to give back to a great cause.

Looks like you are good guys who want to make a change in the PC case market.I hope you are also going to make a smaller mATX case with similar looks to this

[WarpedVisionPC]

We are working on one as we speak as a lan box with built in stand to fit 24in lcd think of a small water cooled suit case.