New Water Cooling Loop

[RJSX1]

Hi guys, I'm new to water cooling but ive built many computers. I was wondering if this is a good custom loop for an I7 4770k or an I7 5820K inside a Corsair 750D?

Part #   Product Description Qty Price Total ex-rad-315

XSPC EX240 Dual 120mm Low Profile Split Fin Radiator $49.95 $49.95 ex-blc-971

XSPC RayStorm High Performance Acetal CPU Liquid Cooling Block - Intel (Sockets LGA 115x / 1366 / 2011) $62.99 $62.99 ex-pmp-141

Phobya DC12-260 12V Water Cooling Pump - (DC12-260) $50.99 $50.99 ex-tub-1215

Alphacool G1/4 Thread 1/2" (13mm) ID FatBoy Barb - Deep Black $2.99 $23.92 ex-res-144

Swiftech MCRES Micro Rev. 2 Small Form Factor / High-Flow Reservoir (1/2" ID & 3/8" ID) $25.95 $25.95 ex-tub-1947

Alphacool Compression Fitting - G 1/4 Thread 1/2" ID x 3/4" OD (19/13mm) - Chrome $7.99 $63.92 ex-tub-1573

PrimoChill PrimoFlex Advanced LRT Tubing 1/2"ID x 3/4" OD - Clear (PFLEXA-34) $2.75 $22.00 Subtotal: $299.72

 

[toggleguy]

nice

[Shaqo_Wyn]

 

 

Well it all works together. I assume you're on a budget? The 750D being a pretty large case there are different components you can utilize.

 

Rad: low fpi - for example a 360 Alphacool XT45 in the top

Pump: DDC or D5

Res: EK 100 or 140 X-RES

[Maxwit44]

You could also buy an EK kit like the one linked below, pretty much the same stuff except little bit cheaper. Other than that, looks ok.

http://www.frozencpu.com/products/18964/ex-wat-249/EK_L240_Complete_Dual_120mm_Liquid_Cooling_Kit_EK-KIT_L240.html?tl=g57c607s1948

[RJSX1]

@Maxwit44 @Shaqo_Wyn Thanks! It really helped a lot!

[Peopie]

I agree with Shaco, You could probably make better use of a larger reservoir.

 

There is no need to have such a tiny reservoir for such a large case, unless you plan to shrink your case down in the future

[schlab73]

I agree as well. A larger reservoir would be more convenient (for filling, bleeding, and draining) and could give you slightly better temps on your CPU, not to mention it could look pretty sweet.