Help with watercooling

[Ghost]

O.k that's fixed. I had to add another 1/3 to 1/4 extender.

Also another question.

As you provided me with a alternative route.

You see where I have highlighted with a purple box. Wouldn't the tube be going over the graphics cards? How would this look good/bad.

Last thing what is your opinion on colored coolant?  Red coolant would be good, but if it's going to clog up I'll change to colored tubing. 

• Why do you need a 1/3 to 1/4 extender? That's for the thread the fitting screws into. G1/4 is the industry standard.
• It would look okay. It would look better then the tube coming out of the grommet. Ideally you would water-cool the GPU at a later date.

[X1XNobleX1X]

 

Last thing what is your opinion on colored coolant?  Red coolant would be good, but if it's going to clog up I'll change to colored tubing. 

 

 

[Ghost]

Sorry, missed that part.

 

As far as I know dyes do not cause any kind of clogging. If you think about it; you put about 10 drops of dye into your loop. How could that create enough solid particles to block something?

 

People mistake "dye-coloured" particles which have simply been stained by the dye in the loop for actual dye.

 

 

 

The only downside of dyes is that some parts can get stained by it but you can always flush them out with water to clean them after.

[Wiggly Jiggles]

You'll awnt G1/4" fitting for connecting blocks pretty much, may I suggest the XSPC Black Chrome

[X1XNobleX1X]

Sorry, missed that part.

 

As far as I know dyes do not cause any kind of clogging. If you think about it; you put about 10 drops of dye into your loop. How could that create enough solid particles to block something?

 

People mistake "dye-coloured" particles which have simply been stained by the dye in the loop for actual dye.

 

 

 

The only downside of dyes is that some parts can get stained by it but you can always flush them out with water to clean them after.

Would this apply to the already dyed bottle coolant?

[X1XNobleX1X]

You'll awnt G1/4" fitting for connecting blocks pretty much, may I suggest the XSPC Black Chrome

You think the XSPC black chromes ones are better?

[Ghost]

Would this apply to the already dyed bottle coolant?

Yes

[X1XNobleX1X]

Yes

You've been amazing Ghost. Thank you for all you help. I'm now a bit more confident on what I am doing.

[Ghost]

You've been amazing Ghost. Thank you for all you help. I'm now a bit more confident on what I am doing.

Good luck!

[Wiggly Jiggles]

You think the XSPC black chromes ones are better?

"Better", not really

They have to same compression and pressure bearing, its looks and theme suitability to be honest

Totally up to you!