Build a PC, doesnt turn on! PLEASE HELP

[MadSnuggle]

Hei, today  I build my first Pc folowing this guide: 

So I finished building it and tryed to turn it on for the first time. All the fans are running, all the lights are on, but my monitor sais no signal when i plug it in and is point black. Anyone has any idea what could be wrong?

 

components: 

- INTEL Core i7-4790K, 4x 4.00GHz, boxed

- WD Black 1TB, 4KB Sektoren, SATA 6Gb/s

- KINGSTON 16GB 1866MHz DDR3 CL10 DIMM

- COOLER MASTER CM 690 III

- MSI Z97-GD65 Gaming (7845-002R

- SAMSUNG 840 Evo Series 250GB SSD SATA3

- EVGA SuperNOVA NEX750G 750W ATX 2.3

- MSI GeForce GTX 780 Ti Gaming 3G, 3GB GD

- Cooler master hyper 212 evo

 

[theKumba]

Did you plug your monitor into the right port? (mobo/graphics card) You can change what ports you wanna use in the BIOS.

[Profquast]

Looks like your monitor isn't plugged into your gpu.

[chpoit]

First, did you try booting it out of the box?

Second, I can't see the part above your cooler, did you plug the 4/8pin connector for the cpu?

Third, is your PSU plugged in/ON

Fourth, Is your computer plugged in an outlet that is dependant on a wall switch?

 

EDIT: Derp, I read that your computer did not turn on and only read that.

As the others said your monitor doesn't seem to be plugged in your card

[MadSnuggle]

I tryed all the cables except for the hdmi becouse i dont have one on my atm.

[mariohead123]

I tryed all the cables except for the hdmi becouse i dont have one on my atm.

Did you plug it into the gpu?

[chpoit]

Try changing the pci lane your gpu is in.

 

Also, take a picture of teh back with all the cables plugged in so we can know wether or not your monitor is plugged in the right spot

[TeddyMcSwag]

Maybe you plugged in the power button cable wrong?

[ilikemacandpc]

Maybe you plugged in the power button cable wrong?

 

This. or the the monitor connection is wrong. 

[The Robot]

Check all your cabling again.

[MadSnuggle]

Hei i fixt it, there was still some kind of plastic on my gpu and when i took it off it works! But now that it started up and i got into bios I have foun another problem...  When i urned it on my hd started ticking and it doesnt appear in the bios. I can see my SSD but not my HD. Its all pluged in correctly . Anyone knows waht it could be? 

[chpoit]

either your hdd is defective, the port you plugged it in is defective, the sata cable bringing power to it is defective or you plain just did not plug the sata data cable in.

[brokencross]

Hei i fixt it, there was still some kind of plastic on my gpu and when i took it off it works! But now that it started up and i got into bios I have foun another problem...  When i urned it on my hd started ticking and it doesnt appear in the bios. I can see my SSD but not my HD. Its all pluged in correctly . Anyone knows waht it could be? 

lol, so you sticked in your graphics card with the plastic sleeve in the bus? I cringed. Hope your board is okay.

Anyway, click in hard drive bbs priorities, it'll show up.

[Dorian_WD]

Hey there, I am sorry to hear about your issue.

I would suggest that you check the cabling once again - the HDD's power cable and the SATA cable.

Another thing you could do is check what HDD mode is activated in the BIOS. In storage configuration menu in the BIOS make sure the SATA drive is not set to IDE but to AHCI. 

 

Hope this helps.

Cheers, Dorian_WD

[Male Dominance]

Please select best answer if you've solved your problem.

[Patyo]

Ticking of the hard drive means it's probably receiving power, also means it's likely DOA