Jump to content

Hey gyus i have recently put an GT 220 in a mobo ASUS Z87-K with the latest bios inside her. The point is that with GPU in the pc the monitor doesn't start up. But when i put the GPU out the monitor starts up. I can't put the drivers cause of that problem. Do you believe that if I put the drivers without the GPU will my pc start up with the GPU inside the mobo?

Link to comment
https://linustechtips.com/topic/198777-geforce-220/
Share on other sites

Link to post
Share on other sites

try another gpu, it could be dead, try another output etc etc

Falcon: Corsair 750D 8320at4.6ghz 1.3v | 4GB MSI Gaming R9-290 @1000/1250 | 2x8GB 2400mhz Kingston HyperX Beast | Asus ROG Crosshair V Formula | Antec H620 | Corsair RM750w | Crucial M500 240GB, Toshiba 2TB, DarkThemeMasterRace, my G3258 has an upgrade path, my fx8320 doesn't need one...total cost £840=cpu£105, board£65, ram£105, Cooler £20, GPU£200, PSU£88, SSD£75, HDD£57, case£125.

 CASE:-NZXT S340 Black, CPU:-FX8120 @4.2Ghz, COOLER:-CM Hyper 212 EVO, BOARD:-MSI 970 Gaming, RAM:-2x4gb 2400mhz Corsair Vengeance Pro, GPU: SLI EVGA GTX480's @700/1000, PSU:-Corsair CX600m, HDD:-WD green 160GB+2TB toshiba
CASE:-(probably) Cooltek U1, CPU:-G3258 @4.5ghx, COOLER:-stock(soon "MSI Dragon" AiO likely), BOARD:-MSI z87i ITX Gaming, RAM:-1x4gb 1333mhz Patriot, GPU: Asus DCU2 r9-270 OC@1000/1500mem, PSU:-Sweex 350w.., HDD:-WD Caviar Blue 640GB
CASE:-TBD, CPU:-Core2Quad QX9650 @4Ghz, COOLER:-OCZ 92mm tower thing, BOARD:-MSI p43-c51, RAM:-4x1GB 800mhz Corsair XMS2, GPU: Zotac GTX460se @800/1000, PSU:-OCZ600sxs, HDD:-WD green 160GBBlueJean-A
 CASE:-Black/Blue Sharkoon T9, CPU:-Phenom2 x4 B55 @3.6Ghz/1.4v, COOLER:-FX8320 Stock HSF, BOARD:-M5A78L-M/USB3, RAM:-4GB 1333mhz Kingston low profile at 1600mhz, GPU:-EVGA GTX285, PSU:-Antec TP550w modu, STORAGE:-240gb  M500+2TB Toshiba
CASE:-icute zl02-3g-bb, CPU:-Phenom2 X6 1055t @3.5Ghz, COOLER:-Stock, BOARD:-Asrock m3a UCC, RAM:2x2GB 1333mhz Zeppelin (thats yellow!), GPU: XFX 1GB HD6870xxx, PSU:-some 450 POS, HDD:-WD Scorpio blue 120GB
CASE:-Packard Bell iMedia X2424, Custom black/red Aerocool Xpredator fulltower, CPU's:-E5200, C2D [email protected]<script cf-hash='f9e31' type="text/javascript"> /* */</script>(so e8500), COOLER:-Scythe Big shuriken2 Rev B, BFG gtx260 sp216 OC, RAM:-tons..
Gigabyte GTX460, Gigabyte gt430,
GPU's:-GT210 1GB,  asus hd6670 1GB gddr5, XFX XXX 9600gt 512mb Alpha dog edition, few q6600's
PICTURES CASE:-CIT mars black+red, CPU:-Athlon K6 650mhz slot A, COOLER:-Stock, BOARD:-QDI Kinetiz 7a, RAM:-256+256+256MB 133mhz SDram, GPU:-inno3d geforce4 mx440 64mb, PSU:-E-Zcool 450w, STORAGE:-2x WD 40gb "black" drives,
CASE:-silver/red raidmax cobra, CPU:-Athlon64 4000+, COOLER:-BIG stock one, BOARD:-MSI something*, RAM:-(matched pair)2x1GB 400mhz ECC transcend, GPU:-ati 9800se@375core/325mem, PSU:-pfft, HDD:-2x maxtor 80gb,
PICTURES CASE:-silver/red raidmax cobra (another), CPU:-Pentium4 2.8ghz prescott, COOLER:-Artic Coolering Freezer4, BOARD:-DFI lanparty infinity 865 R2, RAM:-(matched pair)2x1GB 400mhz kingston, GPU:-ati 9550@375core/325mem, PSU:-pfft, HDD:-another 2x WD 80gb,
CASE:-ML110 G4, CPU:-xeon 4030, COOLER:-stock leaf blower, BOARD:-stock raid 771 board, RAM:-2x2GB 666mhz kingston ECC ddr2, GPU:-9400GT 1GB, PSU:-stock delta, RAID:-JMicron JMB363 card+onboard raid controller, HDD:-320gb hitachi OS, 2xMaxtor 160gb raid1, 500gb samsungSP, 160gb WD, LAPTOP:-Dell n5030, CPU:-replaced s*** cel900 with awesome C2D E8100, RAM:-2x2GB 1333mhz ddr3, HDD:-320gb, PHONE's:-LG optimus 3D (p920) on 2.3.5@300-600mhz de-clock (batteryFTW)
Link to comment
https://linustechtips.com/topic/198777-geforce-220/#findComment-2694201
Share on other sites

Link to post
Share on other sites

Hey gyus i have recently put an GT 220 in a mobo ASUS Z87-K with the latest bios inside her. The point is that with GPU in the pc the monitor doesn't start up. But when i put the GPU out the monitor starts up. I can't put the drivers cause of that problem. Do you believe that if I put the drivers without the GPU will my pc start up with the GPU inside the mobo?

Honestly how much of an increase could a GT 220 possibly be over Haswell Intel HD Graphics

"Rawr XD"

Link to comment
https://linustechtips.com/topic/198777-geforce-220/#findComment-2694219
Share on other sites

Link to post
Share on other sites

Did you put the monitor cable in the GPU and not in the mobo..?

this is a very common mistake 

I did it as well........ 

Current system - ThinkPad Yoga 460

ExSystems

Spoiler

Laptop - ASUS FX503VD

|| Case: NZXT H440 ❤️|| MB: Gigabyte GA-Z170XP-SLI || CPU: Skylake Chip || Graphics card : GTX 970 Strix || RAM: Crucial Ballistix 16GB || Storage:1TB WD+500GB WD + 120Gb HyperX savage|| Monitor: Dell U2412M+LG 24MP55HQ+Philips TV ||  PSU CX600M || 

 

Link to comment
https://linustechtips.com/topic/198777-geforce-220/#findComment-2694220
Share on other sites

Link to post
Share on other sites

I dont have another gpu.

Yes i ve put the cable at the gpu.

I have plug the gpu also inside the mobo.

I dont know where to find the iGPU

Is the power connectors connected,if it have one 

Current system - ThinkPad Yoga 460

ExSystems

Spoiler

Laptop - ASUS FX503VD

|| Case: NZXT H440 ❤️|| MB: Gigabyte GA-Z170XP-SLI || CPU: Skylake Chip || Graphics card : GTX 970 Strix || RAM: Crucial Ballistix 16GB || Storage:1TB WD+500GB WD + 120Gb HyperX savage|| Monitor: Dell U2412M+LG 24MP55HQ+Philips TV ||  PSU CX600M || 

 

Link to comment
https://linustechtips.com/topic/198777-geforce-220/#findComment-2694230
Share on other sites

Link to post
Share on other sites

For my friend was working perfectly.

And it has fan so that how i know that is not dead the is up and running

Try putting graphics card into the computer but plug monitor into motherboard and see if you get anything on the display.

 

To reply to someone use the Quote button on the bottom right of the post

"Rawr XD"

Link to comment
https://linustechtips.com/topic/198777-geforce-220/#findComment-2694284
Share on other sites

Link to post
Share on other sites

Try putting graphics card into the computer but plug monitor into motherboard and see if you get anything on the display.

 

To reply to someone use the Quote button on the bottom right of the post

I know how to reply but i want to speak to everybody so i can solve everyones questions

Link to comment
https://linustechtips.com/topic/198777-geforce-220/#findComment-2694305
Share on other sites

Link to post
Share on other sites

ITS WORKINGGGGGGGGGGGGGGGGGGGGGGGGGGGGG THANKS DUDES ITS WORKING

I WAS PRESS IT TOO GOOD AND THEN I TOOK IT OUT AND PUT IT AGAIN. AND MY MONITOR IS PERFECTLY WORKING THANKS

Congrats! Enjoy the... 5% or so more performance increase 

"Rawr XD"

Link to comment
https://linustechtips.com/topic/198777-geforce-220/#findComment-2694328
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×