corsair 350d radiator compatibility (front 360)

CyberJesus88 · May 24, 2013

hi all,

i'm trying to do a little bit of planning for my upcoming water cooled 350d build and have not been able to find anything related to this topic.

ive seen plenty of atx cases modded to fit a 360mm rad but none on the 350d or any other mATX cases.

i'm obviously completely open to do as much modding as is required although i do 'not' want to have to cut into the exterior of the case.

i can see it being a tight fit because the case can nativly fit a 280 and 240 rad in the front, so if 3 x 5.25 = 1 x 120mm then it might just fit..... but of course the 350d only has 2 x 5.25 bays...hmmmm????

enRodjavel · May 24, 2013

Weight 210 mm

Depth 450 mm

Height 440 mm

and the Case have like 50mm high feet, and lets say 10mm other stuff that might be in the way so 440mm - 60mm = 390mm

You should have around 390mm in height in the front so 360mm rad, such as EK-CoolStream RAD XTX (360) that is 400mm might be a tight fit.

this is just Teoretichal, so if ya gona buy the 350D any way buy a 360 rad thats around 390mm and hope that it will fit, and if not u can put it in the top =D