Jump to content

Bad_Pool_Header Blue screen

sprunk

I have had windows 7 installed on this computer for about two months and just from yesterday I am getting a blue screen on startup which is sayind bad pool header. Then it restarts with the same problem.

Not sure why it has just started now? Could this be caused by a dead hard drive?

Thanks

Link to comment
Share on other sites

Link to post
Share on other sites

Nah not on this pc has always been running stock clocks.

Link to comment
Share on other sites

Link to post
Share on other sites

Pool memory errors are usually related to RAM/Cache memory issues.

I'd check my RAM first of all if I were you.

 

Create a live linux partition on a USB stick

Download Linux Live Creator and make a live stick with ubuntu (or any other Distro, ubuntu is easiest imho)

 

Test RAM

Boot from the stick and select Memtest. Run it for 2 passes.

  • Faulty RAM: Replace the RAM, and you should be good.
  • Ram is OK: If memtest reports OK, disconnect any unnecessary peripherals and try to boot then.

 

RAM OK: Boot without peripherals

  • If that works: rule out the good components by adding them one by one and booting each time.
  • If it doesn't work: Safe mode.

 

Normal Boot doesn't work: Try to boot into safe mode

  • If that works: Delete any drivers that may cause the issue. You may opt to reinstall the OS as well.
  • If that doesn't work: Boot into the Ubuntu distro and run some test tools from there to check your harddisk for errors.

 

That should cover all the possible failure points for this BSOD.

Link to comment
Share on other sites

Link to post
Share on other sites

Pool memory errors are usually related to RAM/Cache memory issues.

I'd check my RAM first of all if I were you.

 

Create a live linux partition on a USB stick

Download Linux Live Creator and make a live stick with ubuntu (or any other Distro, ubuntu is easiest imho)

 

Test RAM

Boot from the stick and select Memtest. Run it for 2 passes.

  • Faulty RAM: Replace the RAM, and you should be good.
  • Ram is OK: If memtest reports OK, disconnect any unnecessary peripherals and try to boot then.

 

RAM OK: Boot without peripherals

  • If that works: rule out the good components by adding them one by one and booting each time.
  • If it doesn't work: Safe mode.

 

Normal Boot doesn't work: Try to boot into safe mode

  • If that works: Delete any drivers that may cause the issue. You may opt to reinstall the OS as well.
  • If that doesn't work: Boot into the Ubuntu distro and run some test tools from there to check your harddisk for errors.

 

That should cover all the possible failure points for this BSOD.

I tried memtest and all was ok. I tried running without peripherals to. It can boot into safe mode though. I decided to try reinstalling windows. It is working so far. Not really sure what caused it. It is a really basic pc with not a lot of stuff connected.

I hope I don't run into this problem again.

Thanks

Link to comment
Share on other sites

Link to post
Share on other sites

BTW, what GPU are you running?

Just intel graphics. Its only really used for streaming media and downloading so no need for a GPU. which is strange that it just stopped booting. I hope its fixed now

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×