Obsidian 350d question

[Aadi]

Hi, I was looking to buy a corsair obsidian 350d and planning to use the top and the front for dual 120 mm radiators. If I do this, I can't use the ssd tool less bays, so where do I put my Ssd?

[everything count to life]

You can move the Sdd cage

[joelthezombie15]

Put the ssd on the back of the MB tray with some industrial hook and loop tape. or double sided tape.

[WoodenMarker]

Tape it to the inside of the case? Velcro?

[Aadi]

I thought about doing this and I generally like screws because I move my PC around my house, But I guess some STRONG double sided tape will do...don't want ssd to randomly unplug and crash computer

[melchiorvester]

Double sided tape on top of PSU/back of backplate/ect or just move the hard drive cage move one spot.

[everything count to life]

It's better to move the cage it's a modular cage switch can be moved one or even two places

[Aadi]

Ok, thanks for the suggestions, ill probably move the cage, and if I can't, then ill use some strong double sided tape

[Elbstrand]

If you don't use the 5.25 bays you can also get countless adapter or hotswap cages for the 5.25 bay. In my brother's PC i've built in a mounting thing for slim drives, which supports either dual slim drive or one slim drive and a ssd. I've also seen a 4x 2.5 to 5.25 hotswap bay...

[acidydragon]

I suggest the Velcro method. Good Velcro isn't going to let go until you want it to.

[Brandonsr]

Velcro would be best, It's much easier to remove the ssd opposed to double sided tape.

[Aadi]

Ok, I'm usually a "by the book" person, so you guys helped me out a lot in  making my decision, I'm gonna buy this case!

[ARod]

Ok, I'm usually a "by the book" person, so you guys helped me out a lot in  making my decision, I'm gonna buy this case!

 

Great case, you won't regret it.

[Demon]

You could get a hot-swap bay in one of the 5.25 inch bays or just simply put it on the bottom of the 5.25 inch bays you could put it in the hard drive cage with a 3.5 to 2.5 inch adaptor.

[pzt]

strap it down in your 5.25" bay with like a hot swap adapter. Thats what i plan on doing when i get mine since im doing 2x240 rads i will have to take out all hdd mounts and ssd mounts. plenty of ways to do so!

 

also some people said just put it on the back of the mb tray that works great too! you can find some mounts on ppcs i believe they are called UN-mounts they have tons of litle miscellaneous mounts for everything! High quality too!