RVZ01 Build Help

[Jarand]

Hi

I'm trying to get the GPU Support brace to help support my MSU Gaming 770 in my RVZ01, but it seems I'm missing a screw or something (though the manual does not show a missing screw.

I haven't been able to find a video which shows it being assembled. For reference, it is the bracket shown at http://youtu.be/FbhPMe7T27Y?t=6m22s

 

I've attached a picture of what I have left to work with, but it doesn't seem I have something that can go through the brace and join the 2 bits, as well as attach to the GPU support plate.

I have also referred to the manual with no luck. (http://www.silverstonetek.com/downloads/Manual/case/Multi-RVZ01-Manual.pdf)

 

Anyone had experience with this?

 

[Prodigydeadeye]

You don't need to use the brace. You will be fine without it, just thought I would let you know. Nothing to stress over if you can't find it.

[qwertywarrior]

i didnt need to use the brace on my bro's build

looked pointless to me

[Jarand]

Thanks. I would be a little more comfortable if I can get it working, but if I can't, I will just close it up and call it a day, but I do want to take it to LANs etc.

Not a big deal, but if anyone does now what I am missing, I'd love to know.

 

Thanks for the quick responses.

[Exodk93]

i used it on my build. 

 

for me i lined up which holes i was using under the gpu. and put the bottom half of it there > inserted GPU > put other half of the bracket on and screwed it in... also it screws in on the base but that is on the top half near where the 2.5" drives are mounted

 

if you want i can take photos of how it looks after installation? id just need to do that after work