UV LED questions

[MariusJS]

Ok, so I am wondering if this is possible: One of theese http://www.watercoolinguk.co.uk/p/Pre-Wired-Ultra-Bright-5mm-Single-UV-LED_179.html hooked up to a molex Female - Female cable and the to one of those http://www.watercoolinguk.co.uk/p/4pin-3pin-Molex-Reducer-12V-100mm_995.html and the 3-Pin into a Lamptron FC-8 anyone know if this will work?

[-Liquidman-]

Yes, it will work.

[MariusJS]

OK, thanks man, how many UV LED's like this will i need to ligth up 4 Gelid wings? and some tubing?

[-Liquidman-]

If you need to light up that many things then i think you should go with UV cathode instead.

[MariusJS]

Yeah, i was thinking about maybe doing that, but can i do the same thing with a cathode?

[-Liquidman-]

You can take the power from there but you can´t dim the light with the fan controller.

[MariusJS]

But the LED can be dimmed right? if that is the case i will just buy 5-10 LED's :) (and sleeve them)

[-Liquidman-]

Yes, but then you should buy 12v leds like these http://www.watercoolinguk.co.uk/p/Phobya-LEDready-Twin-3mm-Ultra-bright-UV-30cm-black_18136.html. With 5v leds you can easily damage the leds if you crank the voltage up from your fan controller. The alternative is to buy random UV leds and change the resistor.

[MariusJS]

Ok, thanks for everything -Liquidman- would i be able to dimm theese? http://www.watercoolinguk.co.uk/p/Phobya-LED-Flexlight-HighDensity-30cm-UV-36x-SMD-LED´s_20989.html

[-Liquidman-]

np:D

Yes, it should work just fine .

[MariusJS]

Then I will buy that when i get money for it :) and thanks again! :)