Client cannot connect to the internet

[12860682321]

So I have a Pfsense router that is connected to a Cisco SF 200 24 port switch. I also have 7 wireless access points connecting to the switch, they are Cisco WAP4410N. I set the router through the basic setup wizard and set the port interfaces correctly. I double checked all the parameters on the router and it should be able work. However when I'm tried to connect my phone onto one of my access poiints, it can't connect. my phone said that It fail to obtain the ip address, and I check all over the internet to see how to fix it. I tried to connect one of my old routers to the switch and it connects just find. If I disconnect the non-pfsense router while the Pfsense router is connected, my devices still have access to the internet. So I don't know what's happening. when I have a new device connect to the access point where I have my pf sense router connected then I won't connect. However when I have one of my devices already connected to the internet and just switch to my pfsense router then it still works. I only need my pfsense router as a wifi portal. any way to fix this. Thanks.     

[Altecice]

Make sure DHCP is enabled on the Router, Also You may want to manage that switch into VLANS for security.

[P3rad0X]

Is it possible to draw us a netowrk map with ip's?

 

Maybe it is a routing issue some ware along the line.

[gramzon]

Is it possible to draw us a netowrk map with ip's?

 

Maybe it is a routing issue some ware along the line.

Along with all your administrator username and passwords please

[P3rad0X]

Along with all your administrator username and passwords please

Username: admin

Password: admin

 

Most of the time