Keyboard stabilizer band aid mod problems

[cleric_warlock]

I’ve been trying to bandaid mod my stabs so they are as quiet as possible when bottoming out, but no matter what I do, i can’t seem to get rid of a slight stickiness to the bottom out sound. I’ve used both conventional bandaids with thin cushions and the precut bandaids you can get off amazon both with and without lube. Nothing seems to stop that slightly sticky sound on bottom out except removing the bandaids altogether. I’ve even tried uhmw 5mil tape, but that stuff makes the bottoming out sound much louder than with nothing there. Is there anything I can still do?

[saintlouisbagels]

you can start off by telling us what keyboard you're using, what stabilizers it has, and what aftermarket stuff you'd added since original purchase lol

[cleric_warlock]

14 minutes ago, saintlouisbagels said:

you can start off by telling us what keyboard you're using, what stabilizers it has, and what aftermarket stuff you'd added since original purchase lol

Keychron Q6 pro with durock v2 stabs, everything else was already explained. The brand of those precut strips is honkid, literally one of the first things that comes up on amazon when you search. lube is krytox g0

[GarlicDeliverySystem]

 

If you want to get rid of the sticky sound/feeling, remove as much lube as possible and also use dry buffers or tape. They should only become sticky once the lube comes into a play. So as little lubricant as possible and a good tight fit on the wire in the stabilisers so to avoid any ticking.

 

But to be honest it is really hard for me to say what exactly is happening here.