Jump to content

Any Power Supply Modded to be External?

BigBig5

I want to know if anyone modded a PSU to be external like a Xbox 360 power brick or a laptop charger because I am thinking of making a slim/small Mini ITX gaming case.

CPU: AMD Ryzan 7 7800X3D  Mobo: ROG Strix B650E-F Gaming WiFi   RAM: 32 GB(2x16GB) G.Skill Flare X6 EXPO@ 6000MHz  GPU: ASRock Phantom Gaming OC Edition AMD Radeon RX 7900 XT
Case: Lian Li O11 Air Mini  PSU: Corsair RM1000e  SSD: Team Group MP34 4TB PCIe 4 NVME, Mushkin REACTOR 960GB, Patriot Torch LE 960GB  Cooling: Thermalright Phantom Spirit 120 SE (PS120SE) with Thermal Grizzly Kryonau & 9x Thermalright TL-C12 PRO 120mm

Link to comment
Share on other sites

Link to post
Share on other sites

You'd probably have to have all of the cables in some sort of tube connected to extensions that are available on the outside of your case. Other than getting a specific external power supply, it's going to be really bulky and a pain to use :P.

 

Have you seen the EVGA hadron? That has a slim PSU that fits in the bottom of the case to make the most of the space..

Aragorn (WS): 250D | 6800k | 840 Pro 512GB | Intel 530 480GB  | Asus X99-M WS | 64GB DDR4 | Corsair HX720i | GTX 1070 | Corsair H115i | Philips BDM4350UC 43" 3840x2160 IPS

Gimli (server):  Node 304 | G4560 | ADATA XPG SX8000 128GB | 2x 5TB WD Red | ASROCK H270M-ITX/AC  | 8GB DDR4 | Seasonic 400FL

 Omega (server):                 Fractal Arc Mini R2 | i3 4130 | 500GB Maxtor | 2TB WD Red : Raid 1 | 3TB Seagate Barracuda | 16GB RAM | Seasonic G-450w
Alpha (WS): 900D | 4770k | GTX 780  | 840 Pro 512GB  | GA-Z87X-OC | Corsair RM 850 | 24GB 2400mhz | Samsung S27B970D 2560x1440

                              ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

Link to comment
Share on other sites

Link to post
Share on other sites

What is your Goal?
I am using a PSU as a 5V 25A source.

 

If you want to take a PSU outside of the case it would be realy hard to do, because you would need to run thick wires, for 12v 5v 3.3v and GND and Avarage wires for -5v -12v PSU_on and POWER_OK and all that with costume connectors.
 

Easyer would be: http://www.amazon.de/PicoPSU-160-XT-DC-DC-Netzteil-power-supply/dp/B0045IR65U/ref=sr_1_6?ie=UTF8&qid=1400430030&sr=8-6

and a Laptop Powerbrick

but i have no experience with it.
 

Or use some 1U PSU and put it inside,...

i am not a native speaker of the english language

[spoiler=My Rig: ]CPU: i7-3770k@Stock | Ram: 3x4GB@1600Mhz | Graka: 660TI@Stock | Storage: 250GB 840Evo, 1x1TB,2x2TB,2x640GB,1x500GB (JBOD) + NAS: DLINK DNS-320 2x3TB Raid1

 
Link to comment
Share on other sites

Link to post
Share on other sites

A DC-DC converter like the PicoPSU with an AC adapter would be your best option if it absolutely has to be outside the case, but it does get pricey for a 12V adapter with enough amperage.

 

I believe that the M4 is the largest you can get at 250 watts, but that should be enough for a mid-range gaming PC.

 

The first gen Xbox 360 power supply is rated for 203 watts, so it would be a good cheap option for your external adapter, and I'm really not sure what other options there are for that high of wattage. Your typical laptop power supply is only going to be 60 to 90 watts, and secondly most of them are 19 volts which does not work with most PicoPSU's.

 

 

The simple solution is to use a 1U Flex or SFX PSU inside of the case...

Link to comment
Share on other sites

Link to post
Share on other sites

 

4 Layer PCB, 500W, 92%-93% efficiency. You will need 2 power bricks to drive this thing.
 
 
 
 

KYzTLD7.jpg

 

 

Where can I get that?

CPU: AMD Ryzan 7 7800X3D  Mobo: ROG Strix B650E-F Gaming WiFi   RAM: 32 GB(2x16GB) G.Skill Flare X6 EXPO@ 6000MHz  GPU: ASRock Phantom Gaming OC Edition AMD Radeon RX 7900 XT
Case: Lian Li O11 Air Mini  PSU: Corsair RM1000e  SSD: Team Group MP34 4TB PCIe 4 NVME, Mushkin REACTOR 960GB, Patriot Torch LE 960GB  Cooling: Thermalright Phantom Spirit 120 SE (PS120SE) with Thermal Grizzly Kryonau & 9x Thermalright TL-C12 PRO 120mm

Link to comment
Share on other sites

Link to post
Share on other sites

Where can I get that?

 

The only place I can find it is here: http://2.taobao.com/item.htm?id=19962049933

Basically the Chinese version of eBay.

 

Keep in mind you then have to somehow get 500w of power to that... It would be great for inside of a vehicle or running off a battery, but you'd need two ~300w 12v AC adapters to power this due to the inefficiency of them if you are going to use it in your house.

You could also mod a 500w computer PSU with a single 12V rail, or use one of these below, but its pretty clunky.

 

sku_71688_1.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

 

4 Layer PCB, 500W, 92%-93% efficiency. You will need 2 power bricks to drive this thing.

That is AMAZING!

 

I wish I'd known about this before. Two power bricks though - that seems a bit silly. I would prefer a system with 1 power brick with half the wattage.

CPU: i7 2600 @ 4.2GHz  COOLING: NZXT Kraken X31 RAM: 4x2GB Corsair XMS3 @ 1600MHz MOBO: Gigabyte Z68-UD3-XP GPU: XFX R9 280X Double Dissipation SSD #1: 120GB OCZ Vertex 2  SSD #2: 240GB Corsair Force 3 HDD #1: 1TB Seagate Barracuda 7200RPM PSU: Silverstone Strider Plus 600W CASE: NZXT H230
CPU: Intel Core 2 Quad Q9550 @ 2.83GHz COOLING: Cooler Master Eclipse RAM: 4x1GB Corsair XMS2 @ 800MHz MOBO: XFX nForce 780i 3-Way SLi GPU: 2x ASUS GTX 560 DirectCU in SLi HDD #1: 1TB Seagate Barracuda 7200RPM PSU: TBA CASE: Antec 300
Link to comment
Share on other sites

Link to post
Share on other sites

That is AMAZING!

 

I wish I'd known about this before. Two power bricks though - that seems a bit silly. I would prefer a system with 1 power brick with half the wattage.

He has other versions. As you can see the markings on PCB, 300W, 400W and 500W.

Link to comment
Share on other sites

Link to post
Share on other sites

He has other versions. As you can see the markings on PCB, 300W, 400W and 500W.

Do you have a link to the specific page? The website was difficult to navigate, Google Chrome could not do accurate translations for me.

CPU: i7 2600 @ 4.2GHz  COOLING: NZXT Kraken X31 RAM: 4x2GB Corsair XMS3 @ 1600MHz MOBO: Gigabyte Z68-UD3-XP GPU: XFX R9 280X Double Dissipation SSD #1: 120GB OCZ Vertex 2  SSD #2: 240GB Corsair Force 3 HDD #1: 1TB Seagate Barracuda 7200RPM PSU: Silverstone Strider Plus 600W CASE: NZXT H230
CPU: Intel Core 2 Quad Q9550 @ 2.83GHz COOLING: Cooler Master Eclipse RAM: 4x1GB Corsair XMS2 @ 800MHz MOBO: XFX nForce 780i 3-Way SLi GPU: 2x ASUS GTX 560 DirectCU in SLi HDD #1: 1TB Seagate Barracuda 7200RPM PSU: TBA CASE: Antec 300
Link to comment
Share on other sites

Link to post
Share on other sites

Do you have a link to the specific page? The website was difficult to navigate, Google Chrome could not do accurate translations for me.

I am guessing every PSU is made by order. Right now, he has only 150W ready for sale. http://2.taobao.com/item.htm?spm=2007.1000337.18.2.DLEquJ&id=18631586796

You can either click that blue head thing to chat with him, or go to a Chinese forum to find him. http://www.chiphell.com/space-uid-25743.html

I usually contact him on that forum. If you are interested in this PSU, I will get price for you, assuming you do not speak or read Chinese. Informal Chinese can be very hard to machine translate since Chinese do not have very strict grammar in these situation.

Link to comment
Share on other sites

Link to post
Share on other sites

There's also fully ready-made single-box solutions such as the Nesteq Nova, but they are a bit hard to find.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×