Jump to content

I shall tell about the events

-i buy new pc parts

Specificly 

2x16GB RAM

AMD RYZEN 7800X3D

B650 Tomahawk WIFI

 

I come from an Intel i7-7800k

MSI gaming PRO motherboard

 

-pc is build and works.

I get into bios. Windows doesn't work.

I get a USB flash drive for a windows install. Installation proceeds.

 

Then suddenly "no signal" without an alternative because I cant see i wait 30m and turn off the pc the worst came to pass. Windows corruption.

 

Now even after safety erasing my m.2 in the bios every time i wanna reinstall windows i get blue screened. I also tried (sfc /scannow at the command prompts) that failed at 24% and i blue screen there as well.

 

Is my PC a brick or what can i do?? I'm clueless.

Link to comment
https://linustechtips.com/topic/1537803-cant-install-windows-properly/
Share on other sites

Link to post
Share on other sites

17 minutes ago, SerHoneyBadger said:

I shall tell about the events

-i buy new pc parts

Specificly 

2x16GB RAM

AMD RYZEN 7800X3D

B650 Tomahawk WIFI

Is this EXPO or XMP RAM and specifically what RAM?  Did you enable EXPO in the BIOS? (trying at stock RAM speed first is probably advisable if you did)

ASUS B650E-F GAMING WIFI + R7 7800X3D + 2x Corsair Vengeance 32GB DDR5-6000 CL30-36-36-76  + ASUS RTX 4090 TUF Gaming OC

Router:  Intel N100 (pfSense) Backup: GL.iNet GL-X3000/ Spitz AX Switches: Netgear MS510TXUP, MS510TXPP, GS110EMX
WiFi6: Zyxel NWA210AX (1.7Gbit peak at 160Mhz) WiFi5: Ubiquiti NanoHD OpenWRT (~500Mbit at 80Mhz)
ISPs: Zen Full Fibre 900 (~930Mbit down, 115Mbit up) + Three 5G (~1200Mbit down, 115Mbit up, variable)
Upgrading Laptop/Desktop CNVIo WiFi 5 cards to PCIe WiFi6e/7

Link to post
Share on other sites

What monitor? Could be getting into an issue where the monitor somehow doesn't support default driver-less resolution... try another or a TV if you can.

F@H
Desktop: i9-13900K, ASUS Z790-E, 64GB DDR5-6000 CL36, RTX3080, 2TB MP600 Pro XT, 2TB SX8200Pro, 2x16TB Ironwolf RAID0, Corsair HX1200, Antec Vortex 360 AIO, Thermaltake Versa H25 TG, Samsung 4K curved 49" TV, 23" secondary, Mountain Everest Max

Mobile SFF rig: i9-9900K, Noctua NH-L9i, Asrock Z390 Phantom ITX-AC, 32GB, GTX1070, 2x1TB SX8200Pro RAID0, 2x5TB 2.5" HDD RAID0, Athena 500W Flex (Noctua fan), Custom 4.7l 3D printed case

 

Asus Zenbook UM325UA, Ryzen 7 5700u, 16GB, 1TB, OLED

 

GPD Win 2

Link to post
Share on other sites

-I swapped to a 1080p monitor. I got a clean usb drive for windows install.

-Cleared my c-mos and to just the one ram stick that is working

-no signal at the same step of the installation.

 

I'm now stuck again with no signal or any way to save my system from a second restart during the installation process. I'm considering going to the shop but i know 9/10 I'll get scammed out of my money.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×