maybe broken mobo idk help

[Toaster241]

so i have the asrock b450m r 4.02 it says it support ryzen 5000 series i bought ryzen 5 5600 and it wont post. when i turn the pc on the gpu fans ramp to 100% and it does nothing else i removed 1 ram stick it did the same i replaced the gpu did the same then i cleared cmos by removing the battery didnt help it either then i tried with a ryzen 2000 series and it wont even turn on please help

[TatamiMatt]

7 minutes ago, Toaster241 said:

so i have the asrock b450m r 4.02 it says it support ryzen 5000 series i bought ryzen 5 5600 and it wont post. when i turn the pc on the gpu fans ramp to 100% and it does nothing else i removed 1 ram stick it did the same i replaced the gpu did the same then i cleared cmos by removing the battery didnt help it either then i tried with a ryzen 2000 series and it wont even turn on please help

Does the board have any troubleshooting LEDs? If so which lights are on if nay when trying to boot?

[Toaster241]

12 minutes ago, TatamiMatt said:

Does the board have any troubleshooting LEDs? If so which lights are on if nay when trying to boot?

no sadly no LEDs also i figured why it wasn turning on with the other cpu because its bent af 

[TatamiMatt]

the 2000 series? damn, check both processors, (i mean whichevers ones bent, bit of a RIP) but are any of the pins bent or awry?

[Toaster241]

3 minutes ago, TatamiMatt said:

the 2000 series? damn, check both processors, (i mean whichevers ones bent, bit of a RIP) but are any of the pins bent or awry?

yeah the 2000 series cpu is bent because of the cooler i guess it works in the original pc with its cooler because i guess better mounting pressure but forget about that i wanna focus on the non working motherboard if you have any clues i tried searching for a bios update but cant seem to find it for this motherboard on asrocks official site 

 

[Toaster241]

can it be that i used to run a 3700x in this motherboard with wraith stealth prism in it can it bend the socket in someway? its diiferent mounting than the wraith cooler can it be to low pressure?

[TatamiMatt]

see thats what im wondering, if its a motherboard issue at all, does the 5600 maybe not work because of bent pins? did the 2000 series mess up the socket? as its a cpu issue im not sure what else couldve went wrong as its a pinless socket and pins are on the cpus instead.

 

Generally too low a pressure isnt an issue for damaging the socket as youre not, yknow, putting pressure on it, but can lead to chip overheating but still shouldnt be an issue if temps were okay before.

 

Maybe take a flashlight or phone and inspect the socket, cpu and cpu pins for damage, if nothing then ig we can go from there?

[Toaster241]

socket looks clear no pins bent i bought the cpu yesterday and inspected it for damage before installing i checked the pins again looks good no bent pins or anything 

[TatamiMatt]

29 minutes ago, Toaster241 said:

socket looks clear no pins bent i bought the cpu yesterday and inspected it for damage before installing i checked the pins again looks good no bent pins or anything 

hmmmm, im really not too sure then, do any other components do anything? case fans running? cpu fan running? any rgb to check? PSU running? all cables properly seated? even if they look seated reseat them? I had an issue with cables like this actually where PC turned on no prob. I shut it off, moved room and it wouldnt POST but everything else would come on. Made 100% sure every cable was seated well. Nothing. Thought, no chance, pulled out 12V cpu cable and reseated and bam no issues

[Toaster241]

2 minutes ago, TatamiMatt said:

hmmmm, im really not too sure then, do any other components do anything? case fans running? cpu fan running? any rgb to check? PSU running? all cables properly seated? even if they look seated reseat them? I had an issue with cables like this actually where PC turned on no prob. I shut it off, moved room and it wouldnt POST but everything else would come on. Made 100% sure every cable was seated well. Nothing. Thought, no chance, pulled out 12V cpu cable and reseated and bam no issues

i reseated everything all the fans spin also cpu fan spins rgb is only on gpu hdd drive spins psu is runing but i only get a black screen like theres no input it goes in standby mode tried both display port and hdmi gpu fans ramp to 100% and thats all it does 

[Toaster241]

4 minutes ago, Toaster241 said:

i reseated everything all the fans spin also cpu fan spins rgb is only on gpu hdd drive spins psu is runing but i only get a black screen like theres no input it goes in standby mode tried both display port and hdmi gpu fans ramp to 100% and thats all it does 

backlight keyboard also doesnt turn on when i plug it in 

[Toaster241]

yeah the motherboard must have gone bad i tried with new ram new psu new gpu unplugged everything but the 24pin 4pin and gpu power and still nothing so something has to be wrong with the cpu socket i guees but looks fine tho idk im out of ideas what else to do i might just buy a new mobo