Wall mounted case for custom loop build

[Jehdo]

Budget (including currency): 1500-2000 usd is what im willing to spend if thats what it takes.

Country: USA

Games, programs or workloads that it will be used for: Other

Other details: Looking for a wall mounted PC case nothing super special.

 

 

 

Having trouble finding a wall mounted pc case that can support everything i want to put on it. I want something similar looking to this.

 

  

I like the open design of this while it still having cable routing and whatnot. Back to the issue at hand, what im tryinig to mount on this is full custom loop. I have two 560mm radiators, two EK 250 reservoirs, Dual D5 EK pump, and full hardline glass tubing. Already have all the hardware and the missing link here is the wall mounted case. 

 

To give you an idea of the hardware i have already, it's a 7800x3d, 4090, 64gb ram, asus crosshair mobo, evga supernova psu, all EK blocks, res, pump, and fittings. 

 

Budget comes down to this. If there is something that already exists then im okay with paying around 500 for it. If i have to literally custom make something like this my budget is more like 1-2k (USD)

 

Any suggestions or ideas?

 

 

 

[brob]

Are there any off-the-shelf cases that support 2x560 rads? I expect you will have to go the custom route.

[Jehdo]

1 hour ago, brob said:

Are there any off-the-shelf cases that support 2x560 rads? I expect you will have to go the custom route.

Yea i have an older case that had support for em but had to kinda modify it to make the rads fit.

Any suggestions on who to go to for something custom? Like a company that can custom laser cut the stuff or something along those lines. I obviously dont want to cnc anything lol.

[brob]

A local custom metal fabricator that also powder coats should be able to do the job. It's really just a matter of bending and cutting sheet metal. Perhaps a little welding. 

 

You will need drawings, possibly prepared by the fabricator. I wouldn't think that would be difficult as it's just a plate with sides folded back to form a cavity for wiring and mounting and suitable mounting holes and brackets.

[Jehdo]

7 minutes ago, brob said:

A local custom metal fabricator that also powder coats should be able to do the job. It's really just a matter of bending and cutting sheet metal. Perhaps a little welding. 

 

You will need drawings, possibly prepared by the fabricator. I wouldn't think that would be difficult as it's just a plate with sides folded back to form a cavity for wiring and mounting and suitable mounting holes and brackets.

My father is a retired chief mechanical engineer of a major auto maker, im sure he could design something for me. So i guess my next step would be to get a design made and then me finding a metal fab shop who could do it on the cheap. I can powder-coat it myself thankfully. Just a lot of legwork for this one-off thing if there was an option out there.

[brob]

Wall mounted cases never became popular. Lian Li had a line for a while, but it was discontinued a few years ago. They are still available but IRC the largest is the PC-O7SX.