little yellow beast re-shelling

[johnny45]

any thoughts an advice on new case an mods for my old build an layout as ill soon be transferring my previous LITTLE YELLOW BEAST

 

 

 

 

to my new case the nzxt h5 flow - paint job still in the works

 

 

 

 

 

 

 

 

the case needs two more even coats long with the

io & pci plates hard drive , bottom angled fan mount an rad mount brackets before gear would be transferred

 

still waiting on vertical mount to arrive so i can paint that to

 

all the previous setup's gear is to be moved aside from a ram upgrade im going from 32gb to 64gb

 

my current game plan for gear layout in the new case is to vertical mount gpu as before but with Coolermaster Universal Vertical GPU Holder Kit Ver.2   an to mount the aio in the front top fan position in the pull config

with both 120mm fans as front exhaust on the outer of the rad bracket mount also with the bottom angled fan as exhaust to an a 120mm Fan Size Cooler Exhaust Shroud 

 

on the other side of the aio as a intake scoop aimed torwards the top front fan to be set as intake along with the other an rear also as intake

 

ther are two main reasons i down with some of my builds

 

1.positive pressure with some case an my room air flow an temps an gear just works better

2.cleaning my home has a shitty stucco ceiling the just flaks fine paint dust that cake my filter on pc's an other gear a as the home is a rental i cant do a thing about it so

  

  ease of cleaning is a must especially not having to open up the case every week to clean but rather just taking my shopvac over the outside to off an out the filters is better

  an iv got some good filter mesh to put between the top an rear fans that iv used before the collects the paint fleck an does hinder air flow

 

 

 

so thats the jest your thought advice , or gentle criticism  

 

06/22/23 update

 

2nd & 3rd paint coat update

 

 

 

 

these 6 pixs are of the 2nd & 3rd coatsthis side of the front panel looks better on the other side

more pixs later plus the io pci plates an drive an fan tray mounts an fittings will be coated later to day then a final pic with all together before the pc gut are transferred