cpu temp at 97

[Tino s]

I got a problem with my aio cooler not cooling my cpu down, idk if I have connected the cable the right places, I can send more pictures if need   Specs (Intel® Core™ i7-13700K

NZXT Kraken Liquid Cooler Z73 RGB 360 mm

Gigabyte Z690 AORUS ELITE DDR4

Corsair Vengeance RGB Pro 16 GB (2 x 8 GB) DDR4-3200 CL16

WD Black SN850X PCIe 4.0 NVMe M.2 - 1TB

WD Black SN850X PCIe 4.0 NVMe M.2 - 2TB

Gigabyte GeForce RTX 3080 Ti Vision OC 12GB

be quiet! Straight Power 11 1000 W 80+ Platinum)

[My_Computer_Is_Trash]

Does you cooler show any signs of life?

[Tino s]

2 minutes ago, My_Computer_Is_Trash said:

Does you cooler show any signs of life?

the lcd turns on, I would believe it does 

 

[My_Computer_Is_Trash]

1 minute ago, Tino s said:

the lcd turns on, I would believe it does 

 

Do the fans spin? Do they stay on?

[Tino s]

2 minutes ago, My_Computer_Is_Trash said:

Do the fans spin? Do they stay on?

they are plugged in to the lian li, hub should I change that ?

[Needfuldoer]

Can you tell if the pump is running?

 

What happens if you plug it into CPU_FAN instead of CPU_OPT?

[My_Computer_Is_Trash]

But like, it acts normal?

[Supersonicwolfe]

24 minutes ago, My_Computer_Is_Trash said:

But like, it acts normal?

Check your motherboard manual, CPU_OPT header on Aorus mobo can be configured either as fan or as pump.

since you use an AIO check AIO manual if they ask you to set the duty cycle to 100% or not

Some mother board have a pump header (automatically set it to 100%) you can always set the speed to 100% manually

[Supersonicwolfe]

10 minutes ago, Supersonicwolfe said:

Check your motherboard manual, CPU_OPT header on Aorus mobo can be configured either as fan or as pump.

since you use an AIO check AIO manual if they ask you to set the duty cycle to 100% or not

Some mother board have a pump header (automatically set it to 100%) you can always set the speed to 100% manually

My CPU_OPT header is set up as my intake fan.

You can change it to pump mode in BIOS (Smar Fan 6)

[Cyberat]

97C is NOT NORMAL, don't let anyone tell you otherwise, your AIO is not activating 100%, because it's not connected.

[Heliian]

Follow the instructions in the AIO manual, you need to plug the pump tach cable into cpu_fan