Pc wont start or do anything

[Gorn21]

Hello there i bought a new ram kit which i installed just to notice that it wont fit with my cpu cooler.

After a few trys to get it to work i swapped back to my old ram connected everything just to discover that my system wont turn on no boot menu nothing.

 

Things i allready tried were looking for loose cables

Swapping the ram sticks in with each other

Unplugging an reconnecting all cables

[Gorn21]

What i havent tryed is to use the other dual channel slot because the mainboard says to use the current slots first

[SimplyGone]

pull the power cord from your PSU and pull the CMOS battery out for 5-10 minutes (you may need to remove your GPU) after the time put the battery back, put the card back in if you had to take it out and plug the power back in.  see if it posts

 

Edit:

 

Make sure you leave the computer on for a good 5-10 minutes after turning it on for the first time it'll probably be trying to train the RAM.

[Gorn21]

2 minutes ago, SimplyChunk said:

pull the power cord from your PSU and pull the CMOS battery out for 5-10 minutes (you may need to remove your GPU) after the time put the battery back, put the card back in if you had to take it out and plug the power back in.  see if it posts

 

Edit:

 

Make sure you leave the computer on for a good 5-10 minutes after turning it on for the first time it'll probably be trying to train the RAM.

The old ram is installed and the new one wasnt powered on since i coulndt mont the aoi with it

[SimplyGone]

1 minute ago, Gorn21 said:

The old ram is installed and the new one wasnt powered on since i coulndt mont the aoi with it

It's worth a try.  at least you can tick it off the list of probable solutions if it doesn't work

[Gorn21]

9 minutes ago, SimplyChunk said:

It's worth a try.  at least you can tick it off the list of probable solutions if it doesn't work

Nothing happend

[Gorn21]

I think i habe brought it down to either dead mainboard or psu. Removed everything expect cpu and still no sign of power. Sadly i have nothing here to test it further so i habe to go to the repair shop at monday.

[Gorn21]

Update power button is defekt i feel really stupid after working the whole day on it.

Any way to fix that or should i just get a new casr?