Can it still work?

[Laoxin]

I took it out and it was stuck by the dp plug thingy and then the connecting finger got scratched.It is serious or do I need to fix it?

[Needfuldoer]

Can you take a clearer picture?

 

The most important thing is to make sure those pins aren't shorted together. If you clean those burrs off with a knife, and your motherboard connector touches the parts that are still connected to the rest of the card it might be salvageable. Don't plug it back in until you're 100% sure they're not shorting! 

[Laoxin]

[Logicjunkie520]

6 minutes ago, Laoxin said:

worth a shot how ever make sure those pins are cleaned of burs thats death sentence but it could still work

[emosun]

Looks like the questionable pins are pin 6 and 10 going back from the gap and unfortunately those are data pins and not ground pins.

[Laoxin]

So is it going to work or not?

[emosun]

3 minutes ago, Laoxin said:

So is it going to work or not?

stick it in the board and see.

it's definitely not expected to work with data pins missing but it might surprise us. If a few ground pins were missing it's possible it can work fine without them. but if that particular card really wants those data pins then you;re a bit screwed

[Blue4130]

47 minutes ago, Laoxin said:

So is it going to work or not?

You need to tell us, you have the card...