PC Unstable

[mrmarvmarvv]

Hello again,

Yesterday I posted here trying to get help with my PC cause it kept crashing during Widows installation/boot. (Last Post)
After some more tinkering, I have concluded that the RAM is fine and works on 3200 MT/s.
So the only setting that helped to install windows was setting the CPU ratio option on the bios from auto to 30 (3,0 GHz).
The Problem now is that first off I want to use all of what I paid for in my CPU and even running below base Frequency the system crashes. Prime95 (blend) on all 6 Cores ran for 20 secs before crashing the System.

Could this be just some bios setting that should be changed or could the CPU itself be damaged?

 

[Denniz]

WHat powersupply do you have? Maybe it cant deliver enough power.

[mrmarvmarvv]

3 minutes ago, Denniz said:

WHat powersupply do you have? Maybe it cant deliver enough power.

I have Corsair RM750x Power Supply so it should be sufficient. 

[Somerandomtechyboi]

Try large ffts, prob your rams crapping out, you can tell by feeding the cpu more volt than needed and it still crashes

[mrmarvmarvv]

9 hours ago, Somerandomtechyboi said:

Try large ffts, prob your rams crapping out, you can tell by feeding the cpu more volt than needed and it still crashes

Sorry, I don't understand what you mean. I tried the large FFTs but still crashed. Could you elaborate? 

[Somerandomtechyboi]

2 hours ago, mrmarvmarvv said:

Sorry, I don't understand what you mean. I tried the large FFTs but still crashed. Could you elaborate? 

Basically if you shove more volt into the cpu and it still crashes then its your rams crapping out