No post, black screen after changing rams value

[Mayonesu]

Hey guys I'm sure there's ppl out there having the same issue, I did read a lot of topics and tried solutions that was given but none worked... 

First let me give you my specs

Ryzen 5900x

Noctua nhd15

Kfa2 GeForce GTX 1060 OC

Aorus b550 pro v2

RM 750x

8x4 lpx 3200mhz ram (code: CMK16GX4M2B3200C16) 

1x SSHD 7200RPM Seagate ironwolf

1x m2 sata samsung Evo

Now here's the story, I bought new parts about a week or so (cpu, mobo and cooler) everything worked fine, except that I had to update the BIOS. 

And yesterday I tried to enable xmp which worked too. 

But the dumb guy I am, I tried a setting for no reason I think it was called ram multiplayer or something like that, i know it was the multiplayer corresponding to the MHz of the ram so, 32 was the default, I put 36...and the end. No post, no BIOS nothing. 

I got the dram light on

Spinning fans

The GPU fans starts spinning for a second or so then stop

And when I've noticed that when I press the restart button the led for cpu alert turns on rather than the dram one, but then quickly go back to dram light when the restart button is released. 

 

I tried to switch ram modules, put only one in the A2 slot

CMOS clear + making contact to the 2 pins clear CMOS things

I unplugged my GPU, cpu and ram then tried a q flash BIOS, which it kinda did I guess since the light was flashing then stop flashing but after that the pc tries to reboot after that even without components in it except my drives

I kept audio, USB satas and other things plugged in as I wouldn't see those giving me a problem. 

 

[WereCat]

any post code or just led? 

[suedseefrucht]

22 minutes ago, Mayonesu said:

But the dumb guy I am, I tried a setting for no reason I think it was called ram multiplayer or something like that, i know it was the multiplayer corresponding to the MHz of the ram

If you remove the CMOS battery from your motherboard, all settings will be gone.

So you can just try again without any weird settings.

[DoctorNick]

1 minute ago, suedseefrucht said:

If you remove the CMOS battery from your motherboard, all settings will be gone.

So you can just try again without any weird settings.

@MayonesuDont forget to turn off PSU. 

[Mayonesu]

30 minutes ago, WereCat said:

any post code or just led? 

No, there's no screen on number whatsoever on this board just for LEDs, cpu, dram, VGA , boot

When I turn on the computer the dram led turns on

[Mayonesu]

28 minutes ago, suedseefrucht said:

If you remove the CMOS battery from your motherboard, all settings will be gone.

So you can just try again without any weird settings.

I tried that, the CMOS battery was outside the mobo for the last night

[Mayonesu]

27 minutes ago, DoctorNick said:

@MayonesuDont forget to turn off PSU. 

I always did and do

[Mayonesu]

I'm gonna try to flash another BIOS, when it comes out of the box it had a BIOS from 2020 and didn't even fully support my ryzen 5900x but it worked at least so... Yeah I really hope I didn't kill anything especially the cpu

[WereCat]

25 minutes ago, Mayonesu said:

No, there's no screen on number whatsoever on this board just for LEDs, cpu, dram, VGA , boot

When I turn on the computer the dram led turns on

Sometimes on an ASUS board you get no image but get prompted to press F1 for BIOS setup so try pressing F1 then ESC and Enter... will likely not work but worth a try

[Mayonesu]

9 minutes ago, WereCat said:

Sometimes on an ASUS board you get no image but get prompted to press F1 for BIOS setup so try pressing F1 then ESC and Enter... will likely not work but worth a try

Didn't work

[Mayonesu]

Well guys I'm kinda stuck, I can't think of a solution right now since I don't have other parts to test..

[DoctorNick]

5 minutes ago, Mayonesu said:

Well guys I'm kinda stuck, I can't think of a solution right now since I don't have other parts to test..

Try to remove every sata + usb device + reset cmos by removing battery for 10 min with psu turned off. After turn on PSU and flash the board.

Use bios version 13G 

Download: https://www.gigabyte.com/Motherboard/B550-AORUS-PRO-V2-rev-10/support#support-dl-bios

Keep ram in slot A2 B2.

Flash using Q-flash plus (USB flash drive) - remember to format flash drive to fat32

 

[Mayonesu]

4 minutes ago, DoctorNick said:

Try to remove every sata + usb device + reset cmos by removing battery for 10 min with psu turned off. After turn on PSU and flash the board.

Use bios version 13G 

Download: https://www.gigabyte.com/Motherboard/B550-AORUS-PRO-V2-rev-10/support#support-dl-bios

Keep ram in slot A2 B2.

Flash using Q-flash plus (USB flash drive) - remember to format flash drive to fat32

 

I'll try right now (BTW thanks to everyone who's taking the time to answer I rly appreciate the support) 

[Mayonesu]

1 hour ago, DoctorNick said:

Try to remove every sata + usb device + reset cmos by removing battery for 10 min with psu turned off. After turn on PSU and flash the board.

Use bios version 13G 

Download: https://www.gigabyte.com/Motherboard/B550-AORUS-PRO-V2-rev-10/support#support-dl-bios

Keep ram in slot A2 B2.

Flash using Q-flash plus (USB flash drive) - remember to format flash drive to fat32

 

The flash semms to have worked fine just like in the video but after reassembled the pc tried to boot, still nothing same problem, dram led is on

[DoctorNick]

25 minutes ago, Mayonesu said:

The flash semms to have worked fine just like in the video but after reassembled the pc tried to boot, still nothing same problem, dram led is on

Would be great if you could try with another stick. But its weird. Have you tried booting with 1 stick in every 4 slots at a time?

 

[Mayonesu]

50 minutes ago, DoctorNick said:

Would be great if you could try with another stick. But its weird. Have you tried booting with 1 stick in every 4 slots at a time?

 

I did before the flash update you made me do, I'll try again and keep you updated 

[Mayonesu]

BROOOO I LOVE YOU (no homo) you're my frien now

it works

ima give more context for future ppl reading this

me the dumbass putting bad ram values in the BIOS

beep Boop BIOS was broken so and I tried many things and techniques to restore other version of it but only the one given by this savor on top worked after I changed my ram to another slot (only one stick)