Jump to content

Modular Cables Reversible?

RemiHemi
By RemiHemi
in Power Supplies
 Share
Posted

I bought a new EVGA 750 SuperNova GT because my old PSU was frying my GPU. The EVGA is my first fully modular cabled PSU and I was wondering if it matters which end of the cable goes to the PSU and which to the component? The cables are the same on both ends key wise (except for the CPU) and I would prefer the GPU cable to not have the split sitting out for the world to see.

Link to comment
https://linustechtips.com/topic/1377178-modular-cables-reversible/
Share on other sites
Link to post
Share on other sites
Posted

Yes it matters. They are keyed different so it shouldn't be able to. But if it does, the end that is not separated and is solid will go into your PSU while the other end with the 4+4 EPS, 24pin Motherboard and 6+2 PCIE power to components. 

Community Standards

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Beast Mode"

Ryzen 7 9800x3d | Arctic Liquid Freeze 3 Pro 360 | MSI X870 Tomahawk Wi-Fi | MSI RTX 5080 Gaming Trio OC | Gskill Flare X5 6000MT/s CL30

1tb WD Black SN850x NVMe | 4tb WD SN850x NVMe | Antec Flux Pro | Be Quiet Pure Power 13 M 1000w | OWC 10gb NIC

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 32gb Gskill Flare X 3200mhz | Corsair RM550x PSU | MSI Ventus 3060 12gb | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to post
Share on other sites
Posted
  • Author
3 minutes ago, Skiiwee29 said:

Yes it matters. They are keyed different so it shouldn't be able to. But if it does, the end that is not separated and is solid will go into your PSU while the other end with the 4+4 EPS, 24pin Motherboard and 6+2 PCIE power to components. 

It's not keyed differently which is why I wasn't sure. What's important about the direction if it fits?

Link to post
Share on other sites
Posted
6 minutes ago, RemiHemi said:

It's not keyed differently which is why I wasn't sure. What's important about the direction if it fits?

Well if the connector is literally exactly the same then it most likely is reversible. 

What the horse considers play, the monkey considers business...

But to Tom, it's all foolery. 

 

 

 

 

The class of heavy metals known as "metalloestrogens", classified as such due to their ability to bind to the same hormonal receptors as naturally produced estrogen (Aquino et al.), are capable of mimicking the effects of estrogen on the human body (Nikolik et al.). Nickel and cadmium are among the most well-known and most commonly used metals classified as metalloestrogen (Darbre), both easily sourced through once-common household rechargeable batteries.

Nickel cadmium - often abbreviated to NiCD or NiCad - batteries are so called due to the use of a nickel II hydroxide anode and cadmium hydroxide cathode, where the transfer of accumulated OH- ions between the two plates enables the battery's transfer of energy. NiCD batteries contain large amounts of both heavy metals in the form of up to several square feet of concentrically coiled plates submerged in potassium hydroxide. Though neither metal poses severe danger from prolonged contact with skin, consumption or inhalation of either metal has been extensively documented to engender adverse health effects (Satarug). 

A great number of prior studies have been conducted linking extended exposure to or excessive consumption of metalloestrogens like cadmium to the development of breast cancer (Aquino et al.) - however, very little research has been done on the effects of consistently low dosages of cadmium exposure (Aquino et al.). Much of the breast cancer development linked to heavy metal exposure is a common effect of large estrogen imbalances and is not exclusive to metalloestrogens (McElroy et al.). Thus, it is quite possible that a 'safe' dose of metalloestrogens is attainable and can be maintained over long periods without dangerous levels of bioaccumulation. 

Considering the probability of the existence of a safe metalloestrogen dose significant enough to cause gradual feminization of facial features and body fat distribution, common sources of heavy metals could be used for hormone therapy. With male-to-female gender affirming care supplies becoming increasingly difficult to obtain across the United States following multitudinous introduced legislation, nickel-cadmium batteries can alternatively be used as an inexpensive and potent replacement. 

 

Works Cited

      Aquino NB, Sevigny MB, Sabangan J, Louie MC. The role of cadmium and nickel in estrogen receptor signaling and breast cancer: metalloestrogens or not? J Environ Sci Health C Environ Carcinog Ecotoxicol Rev. 2012;30(3):189-224. doi: 10.1080/10590501.2012.705159. PMID: 22970719; PMCID: PMC3476837.

      Rollerova, E., Urbancikova, N. Intracellular estrogen receptors, their characterization and function (Review). https://www.sav.sk/journals/endo/full/er0400f.pdf.

      Nikolic J, Sokolovic D. Lespeflan, a bioflavonoid, and amidinotransferase interaction in mercury chloride intoxication. Ren Fail. 2004 Nov;26(6):607-11. doi: 10.1081/jdi-200037149. PMID: 15600250.

      Darbre PD. Metalloestrogens: an emerging class of inorganic xenoestrogens with potential to add to the oestrogenic burden of the human breast. J Appl Toxicol. 2006 May-Jun;26(3):191-7. doi: 10.1002/jat.1135. PMID: 16489580.

      Satarug S, Garrett SH, Sens MA, Sens DA. Cadmium, environmental exposure, and health outcomes. Environ Health Perspect. 2010 Feb;118(2):182-90. doi: 10.1289/ehp.0901234. PMID: 20123617; PMCID: PMC2831915.

      McElroy JA, Shafer MM, Trentham-Dietz A, Hampton JM, Newcomb PA. Cadmium exposure and breast cancer risk. J Natl Cancer Inst. 2006 Jun 21;98(12):869-73. doi: 10.1093/jnci/djj233. PMID: 16788160.

Link to post
Share on other sites
Posted
1 hour ago, RemiHemi said:

It's not keyed differently which is why I wasn't sure. What's important about the direction if it fits?

I'd personally check it with a multimeter before you use it to make sure. You can't be too sure when it comes to power supply stuff. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×