Jump to content

Backplate heat

GKing62
By GKing62
in Graphics Cards
 Share
Posted (edited)

I didn't want to revive a 7 month old thread,  so I'll reference it below

but anyway, I've had my MSI 1080 Ti GamerX 11G for 4 years now and I hadn't realized how hot the backplate gets, but I recently moved to a new 5000D Airflow and was checking fan airflow etc and on a whim touched the backplate  and sure was hot. I'm intaking from side and front and exhausting out the top and rear so airflow is very good and on top of it I run without the front panel on , and the card never gets above mid 50s at 3840x2160 Ultra settings in all my games and has been a beast since.

Edited by GKing62
Link to comment
https://linustechtips.com/topic/1361002-backplate-heat/
Share on other sites
Link to post
Share on other sites
Posted

GPU backplates can get very hot. It's fine. My RX 570 backplate gets right up to the point where it's almost too uncomfortable to touch, but it's completely fine. It's over 3.5 years old, and I run it at 100% load most of the time. If it was going to die it would have done so a long time ago. 

Phobos: AMD Ryzen 7 2700, 16GB 3000MHz DDR4, ASRock B450 Steel Legend, 8GB Nvidia GeForce RTX 2070, 2GB Nvidia GeForce GT 1030, 1TB Samsung SSD 980, 450W Corsair CXM, Corsair Carbide 175R, Windows 10 Pro

 

Polaris: Intel Xeon E5-2697 v2, 32GB 1600MHz DDR3, ASRock X79 Extreme6, 12GB Nvidia GeForce RTX 3080, 6GB Nvidia GeForce GTX 1660 Ti, 1TB Crucial MX500, 750W Corsair RM750, Antec SX635, Windows 10 Pro

 

Pluto: Intel Core i7-2600, 32GB 1600MHz DDR3, ASUS P8Z68-V, 4GB XFX AMD Radeon RX 570, 8GB ASUS AMD Radeon RX 570, 1TB Samsung 860 EVO, 3TB Seagate BarraCuda, 750W EVGA BQ, Fractal Design Focus G, Windows 10 Pro for Workstations

 

York (NAS): Intel Core i5-2400, 16GB 1600MHz DDR3, HP Compaq OEM, 240GB Kingston V300 (boot), 3x2TB Seagate BarraCuda, 320W HP PSU, HP Compaq 6200 Pro, TrueNAS CORE (12.0)

Link to comment
https://linustechtips.com/topic/1361002-backplate-heat/#findComment-14903032
Share on other sites
Link to post
Share on other sites
Posted

So... are you asking why it's hot? Asking for advice how to make it less hot? It's fine.

What the horse considers play, the monkey considers business...

But to Tom, it's all foolery. 

 

 

 

 

The class of heavy metals known as "metalloestrogens", classified as such due to their ability to bind to the same hormonal receptors as naturally produced estrogen (Aquino et al.), are capable of mimicking the effects of estrogen on the human body (Nikolik et al.). Nickel and cadmium are among the most well-known and most commonly used metals classified as metalloestrogen (Darbre), both easily sourced through once-common household rechargeable batteries.

Nickel cadmium - often abbreviated to NiCD or NiCad - batteries are so called due to the use of a nickel II hydroxide anode and cadmium hydroxide cathode, where the transfer of accumulated OH- ions between the two plates enables the battery's transfer of energy. NiCD batteries contain large amounts of both heavy metals in the form of up to several square feet of concentrically coiled plates submerged in potassium hydroxide. Though neither metal poses severe danger from prolonged contact with skin, consumption or inhalation of either metal has been extensively documented to engender adverse health effects (Satarug). 

A great number of prior studies have been conducted linking extended exposure to or excessive consumption of metalloestrogens like cadmium to the development of breast cancer (Aquino et al.) - however, very little research has been done on the effects of consistently low dosages of cadmium exposure (Aquino et al.). Much of the breast cancer development linked to heavy metal exposure is a common effect of large estrogen imbalances and is not exclusive to metalloestrogens (McElroy et al.). Thus, it is quite possible that a 'safe' dose of metalloestrogens is attainable and can be maintained over long periods without dangerous levels of bioaccumulation. 

Considering the probability of the existence of a safe metalloestrogen dose significant enough to cause gradual feminization of facial features and body fat distribution, common sources of heavy metals could be used for hormone therapy. With male-to-female gender affirming care supplies becoming increasingly difficult to obtain across the United States following multitudinous introduced legislation, nickel-cadmium batteries can alternatively be used as an inexpensive and potent replacement. 

 

Works Cited

      Aquino NB, Sevigny MB, Sabangan J, Louie MC. The role of cadmium and nickel in estrogen receptor signaling and breast cancer: metalloestrogens or not? J Environ Sci Health C Environ Carcinog Ecotoxicol Rev. 2012;30(3):189-224. doi: 10.1080/10590501.2012.705159. PMID: 22970719; PMCID: PMC3476837.

      Rollerova, E., Urbancikova, N. Intracellular estrogen receptors, their characterization and function (Review). https://www.sav.sk/journals/endo/full/er0400f.pdf.

      Nikolic J, Sokolovic D. Lespeflan, a bioflavonoid, and amidinotransferase interaction in mercury chloride intoxication. Ren Fail. 2004 Nov;26(6):607-11. doi: 10.1081/jdi-200037149. PMID: 15600250.

      Darbre PD. Metalloestrogens: an emerging class of inorganic xenoestrogens with potential to add to the oestrogenic burden of the human breast. J Appl Toxicol. 2006 May-Jun;26(3):191-7. doi: 10.1002/jat.1135. PMID: 16489580.

      Satarug S, Garrett SH, Sens MA, Sens DA. Cadmium, environmental exposure, and health outcomes. Environ Health Perspect. 2010 Feb;118(2):182-90. doi: 10.1289/ehp.0901234. PMID: 20123617; PMCID: PMC2831915.

      McElroy JA, Shafer MM, Trentham-Dietz A, Hampton JM, Newcomb PA. Cadmium exposure and breast cancer risk. J Natl Cancer Inst. 2006 Jun 21;98(12):869-73. doi: 10.1093/jnci/djj233. PMID: 16788160.

Link to comment
https://linustechtips.com/topic/1361002-backplate-heat/#findComment-14903033
Share on other sites
Link to post
Share on other sites
Posted

Backplates gets very hot nowadays, yes. Been like that since pascal, thats why many highly recommend you to pull out the GPU when the PC have cooled down.

Press quote to get a response from someone! | Check people's edited posts! | Be specific! | Trans Rights

 

Link to comment
https://linustechtips.com/topic/1361002-backplate-heat/#findComment-14903054
Share on other sites
Link to post
Share on other sites
Posted

Better it gets hot than stay cold, because if it's hot that means it's sinking heat off the GPU and helping it stay cooler.

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 11 and Fedora Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

PSU tier list

How many watts do I need?

PSU misconceptions, protections explained, group reg is bad

Link to comment
https://linustechtips.com/topic/1361002-backplate-heat/#findComment-14903640
Share on other sites
Link to post
Share on other sites
Posted

My backplate doesnt get very hot, mildly warm maybe.

Either shit gigabyte cooling or it just doesnt get very hot? Tbf the backplate is aluminum, i guess thats probably why cause aluminum just doesnt feel very hot / dissipates heat quickly.

 

cause my temps are fine?

20210731_022040.thumb.jpg.588e3e4c7f13ee6c3c5c8db0be9b1c98.jpg

The direction tells you... the direction. 

-Scott Manley, 2021

 

 

Link to comment
https://linustechtips.com/topic/1361002-backplate-heat/#findComment-14903663
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×