First build please help

[Tha7_random]

 As you can see it’s getting power but not turning on it’s a 5800x with a x570 board I’m thinking I need a bios update the bios flash back button also responds to touch so I’m thinking that’s it but I every time I have seen a bios update problem it turns on then turns off please help this is super stressful I paid 1000 for just what’s on the motherboard 

[randomnugget935]

what is everything you have done so far, also look on the boards manufacture page to see what CPU's it supports out of the box 

also try booting it up using the pins on the motherboard its self not the button. 

[Tha7_random]

2 minutes ago, randomnugget935 said:

what is everything you have done so far, also look on the boards manufacture page to see what CPU's it supports out of the box 

also try booting it up using the pins on the motherboard its self not the button. 

I have it on the motherboard box with the m.2 ram cpu on it 

[randomnugget935]

1 minute ago, Tha7_random said:

I have it on the motherboard box with the m.2 ram cpu on it 

wheres the ram? 

[Tha7_random]

 

1 minute ago, randomnugget935 said:

wheres the ram? 

Pause video at 8 seconds will see it between gpu and cpu 

[randomnugget935]

Just now, Tha7_random said:

 

Pause video at 8 seconds will see it between gpu and cpu 

what type of ram did you use? 

 

[randomnugget935]

also make sure all the connections are plugged in well.

[KREWLIFE]

Take out one of the RAM sticks, does it post with either one stick?

[KREWLIFE]

Also if I'm not mistaken there are 4 debug leds on that board, just above the 24 pin. CPU, DRAM, VGA, BOOT. Is one of those lit? Or did any one of them at any point lit up?

[Tha7_random]

43 minutes ago, randomnugget935 said:

what type of ram did you use? 

 

trident z 3600 connections are fine thats the first thing i checked 

[Tha7_random]

38 minutes ago, Wayupthere said:

Take out one of the RAM sticks, does it post with either one stick?

didnt post with ram sticks out and no debug led came on i had this issue with a older b450 board that had a up to date bios i assumed it was a dead board could it be something else as you can see in the video i was having the same issue with the board getting power but not posting 

 

[KREWLIFE]

Hmm.. at this point might as well try to (re)do a bios update, take out everything, GPU,CPU and the RAM and re flash the bios, hopefully that will do it.

[randomnugget935]

50 minutes ago, Wayupthere said:

Hmm.. at this point might as well try to (re)do a bios update, take out everything, GPU,CPU and the RAM and re flash the bios, hopefully that will do it.

i wish him the best of luck with that. 

[Tha7_random]

When I took everything off to update the bios again the motherboard booted up by itself was just 24 pin and CPU power connected hoping it works