GPU compatibility PLEASE HELP

[Archerr]

I have ordered both the a1 plus and MSI Radeon RX 6700 XT MECH 2X for a new build, on pc part picker it says the parts aren’t compatible but the dimensions fit and the a1 plus has the right power connections. Will these parts work?

 

gpu: https://www.ple.com.au/Products/645884/MSI-Radeon-RX-6700-XT-MECH-2X-12GB-GDDR6

[brob]

The gpu is 2.5 PCIe slots wide. The case supports 2 slot wide cards. Hence the warning.

[Archerr]

2 minutes ago, brob said:

The gpu is 2.5 PCIe slots wide. The case supports 2 slot wide cards. Hence the warning.

But the card is 51mm thick and the case allows up to 55mm cards.

will the card work but PCPartPicker just assumes it won’t?

[brob]

16 minutes ago, Archerr said:

But the card is 51mm thick and the case allows up to 55mm cards.

will the card work but PCPartPicker just assumes it won’t?

 

Not sure where you found the 55mm case allowance number. Based on pictures it does look like the gpu might fit. 

[Archerr]

2 minutes ago, brob said:

 

Not sure where you found the 55mm case allowance number. Based on pictures it does look like the gpu might fit. 

In the diagram

[brob]

Ah, I missed that.

 

Inwin specs only list 2 slot compatibility so it's likely PCPartPicker used that as the basis for the warning.

[Archerr]

1 minute ago, brob said:

Ah, I missed that.

 

Inwin specs only list 2 slot compatibility so it's likely PCPartPicker used that as the basis for the warning.

Okay, thanks