PC doesn't boot

[Zulu boy]

Hi. I bought a new ASRock b450 motherboard board which ryzen 3000 box ready with ryzen 5 3600.

PC is keeps on restarting after few seconds.

I tried dedicated GPUs RTX 2080, GTX 1080, ASUS 2070. No post

I tried with 1 stick 2666mhz ADATA ram x 8GB, No SSD or M.2

Power supply thermaltake uk 1000watts is working fine with PCs.

 

What is the issue I can't figure it out.

[Fasauceome]

Got a graphics card? If not, the system probably isn't happy and can't output video

[Analog]

The 3600 doesn't have an iGPU and from the specs that you listed in your post you don't mention any dedicated graphics card. If you have plugged in the monitor in any of the ports on that motherboard this might be what's causing your issue.

[Zulu boy]

50 minutes ago, Analog said:

The 3600 doesn't have an iGPU and from the specs that you listed in your post you don't mention any dedicated graphics card. If you have plugged in the monitor in any of the ports on that motherboard this might be what's causing your issue.

I have MSI RTX 2080, MSI GTX 1080, ASUS 2070 8GB. None work.

Even speaker doesn't make any sounds. I tried with GPUs and with out everything. Still doesn't work.

[Zulu boy]

1 hour ago, Fasauceome said:

Got a graphics card? If not, the system probably isn't happy and can't output video

I think I have more then enough GPUs to make any PC happy.

[brob]

The user manual suggests that with Matisse cpu a single memory stick should be inserted in A2, the second slot out from the cpu. Two memory sticks should be in A2 and B2. B2 is the outermost slot.

[Zulu boy]

I tried all the slots but still the same issue. 

[Npiet1]

Just because it's ryzen 3000 box ready, doesn't actually mean it's 100% box ready. Try updating the bios. I've couldn't boot my 570 which was box ready with the 3000 series with a 3000 processor. I had to use a 1400.

[Zulu boy]

Bios version P 3.70 is already updated. Still same issue

[brob]

Why is it sitting on bubblewrap? It should be on a hard surface like the box top. I'd mount it in the case.

[Zulu boy]

20 hours ago, brob said:

Why is it sitting on bubblewrap? It should be on a hard surface like the box top. I'd mount it in the case.

Waste of time

[brob]

6 hours ago, Zulu boy said:

Waste of time

 

Most bubble wrap can carry a charge. Are you sure part of the motherboard is not shorting?

[Zulu boy]

14 hours ago, brob said:

 

Most bubble wrap can carry a charge. Are you sure part of the motherboard is not shorting?

I tried putting on box, fit in the case, other PSU, GPU, RAMS single stick, double stick, without stick, CPU in other mobos (working fine). I think my mobi have BIOS issue.

[brob]

RMA the motherboard, it appears to be defective.

[Zulu boy]

Thanks a lot