Jump to content

need help!

linusasfani
By linusasfani
in Graphics Cards
 Share
Posted

so i just got the second hand gtx 960 i checked everything furmark temps clocks fan speed and everything was fine and when i put it on my system and  start furmark test it goes on 96c in like 1 second and also fans are going 100 % what should i do please help maybe its bug or something because 

image_2021-03-07_201512.png

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, linusasfani said:

so i just got the second hand gtx 960 i checked everything furmark temps clocks fan speed and everything was fine and when i put it on my system and  start furmark test it goes on 96c in like 1 second and also fans are going 100 % what should i do please help maybe its bug or something because 

image_2021-03-07_201512.png

 

image_2021-03-07_201659.png

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, linusasfani said:

 

image_2021-03-07_201659.png

It doesn't look like the card can breathe.

 

8 minutes ago, linusasfani said:

it goes on 96c in like 1 second and also fans are going 100%

The card might have dry thermal paste because it is old

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I need? ATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explained, group reg is bad

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Fasauceome said:

It doesn't look like the card can breathe.

 

The card might have dry thermal paste because it is old

but when i tested on sellers pc it was grate so that was reason why i took it

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, linusasfani said:

but when i tested on sellers pc it was grate so that was reason why i took it

Then I would guess that since the graphics card is almost touching the bottom of your case, means it can't get fresh air

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I need? ATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explained, group reg is bad

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, linusasfani said:

but when i tested on sellers pc it was grate so that was reason why i took it

how much space between the bottom of the GPU shroud and the bottom of the case? As @Fasauceome mentioned, it definitively looks like your GPU is not getting any air. 

Community Standards | Fan Control Software

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Black Out"

Ryzen 9 5900x | Full Custom Water Loop | Asus Crosshair VIII Hero (Wi-Fi) | RTX 3090 Founders | Ballistix 32gb 16-18-18-36 3600mhz 

1tb Samsung 970 Evo | 2x 2tb Crucial MX500 SSD | Fractal Design Meshify S2 | Corsair HX1200 PSU

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 16gb Gskill Flare X 3200mhz | Corsair RM550x PSU | Asus Strix GTX1070 | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

As mentioned above by @Fasauceome I think that there isn't enough space between the bottom of the case and the GPU fan and as a bonus thermal paste might be dry since the card is old

Reminder⚠️

I'm just speaking from experience so what I say may not work 100%

Please try searching up the answer before you post here but I am always glad to help

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
35 minutes ago, Kanna said:

As mentioned above by @Fasauceome I think that there isn't enough space between the bottom of the case and the GPU fan and as a bonus thermal paste might be dry since the card is old

so i got your all advices but i downloaded gpu-z and start furmark test it showed the same temps but when i downloaded the log file the temps are perfect  and thats obviouse

image_2021-03-07_213158.png

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, linusasfani said:

so i got your all advices but i downloaded gpu-z and start furmark test it showed the same temps but when i downloaded the log file the temps are perfect  and thats obviouse

image_2021-03-07_213158.png

Could you maybe take a pic of when the bad temps show?

Reminder⚠️

I'm just speaking from experience so what I say may not work 100%

Please try searching up the answer before you post here but I am always glad to help

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Kanna said:

Could you maybe take a pic of when the bad temps show?

image.thumb.png.329881281ca90a2b248103aeb0e6504f.pngand this happend after like one sec of test

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, linusasfani said:

image.thumb.png.329881281ca90a2b248103aeb0e6504f.pngand this happend after like one sec of test

Seems like dried thermal paste because higher GPU temps under load is normal but that seems pretty high

Reminder⚠️

I'm just speaking from experience so what I say may not work 100%

Please try searching up the answer before you post here but I am always glad to help

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 minutes ago, Kanna said:

Could you maybe take a pic of when the bad temps show?

maybe should i try fresh install of OS because i think that something is bugging

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, linusasfani said:

maybe should i try fresh install of OS because i think that something is bugging

Did you reinstall GPU drivers?

 

Reminder⚠️

I'm just speaking from experience so what I say may not work 100%

Please try searching up the answer before you post here but I am always glad to help

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Kanna said:

Did you reinstall GPU drivers?

 

no but i will try

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, linusasfani said:

no but i will try

 

Yeah DDU and then reinstall latest old drivers are most likely colliding or something

Reminder⚠️

I'm just speaking from experience so what I say may not work 100%

Please try searching up the answer before you post here but I am always glad to help

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Kanna said:

Yeah DDU and then reinstall latest old drivers are most likely colliding or something

where should i make ddu can u link?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, linusasfani said:

where should i make ddu can u link?

Here is a link but be careful and read, prepare latest GPU drivers in forehand

Reminder⚠️

I'm just speaking from experience so what I say may not work 100%

Please try searching up the answer before you post here but I am always glad to help

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, linusasfani said:

where should i make ddu can u link?

https://www.guru3d.com/files-details/display-driver-uninstaller-download.html

 

I'm not actually trying to be as grumpy as it seems.

I will find your mentions of Ikea or Gnome and I will /s post. 

Project Hot Box

CPU 13900k, Motherboard Gigabyte Aorus Elite AX, RAM CORSAIR Vengeance 4x16gb 5200 MHZ, GPU Zotac RTX 4090 Trinity OC, Case Fractal Pop Air XL, Storage Sabrent Rocket Q4 2tb, CORSAIR Force Series MP510 1920GB NVMe, CORSAIR FORCE Series MP510 960GB NVMe, PSU CORSAIR HX1000i, Cooling Corsair XC8 CPU block, Bykski GPU block, 360mm and 280mm radiator, Displays Odyssey G9, LG 34UC98-W 34-Inch,Keyboard Mountain Everest Max, Mouse Mountain Makalu 67, Sound AT2035, Massdrop 6xx headphones, Go XLR 

Oppbevaring

CPU i9-9900k, Motherboard, ASUS Rog Maximus Code XI, RAM, 48GB Corsair Vengeance LPX 32GB 3200 mhz (2x16)+(2x8) GPUs Asus ROG Strix 2070 8gb, PNY 1080, Nvidia 1080, Case Mining Frame, 2x Storage Samsung 860 Evo 500 GB, PSU Corsair RM1000x and RM850x, Cooling Asus Rog Ryuo 240 with Noctua NF-12 fans

 

Why is the 5800x so hot?

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

so i want to add something in this topic before i put card into my system i clean fans and plastic cover and my qauestion is that if there is any possible way to damage the sensor or somthing that shows the wrong temps

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×