Jump to content

Can I replace a DDR3 graphics card with a GDDR5 card?

Mega2

They've got the same slot size and all.

 

One interesting thing I will note is that the graphics card has a max power requirement of 47 W while the port is labelled as providing 25 W. Would that be acceptable?

Link to comment
Share on other sites

Link to post
Share on other sites

You can put any PCIe graphics card in a PCIe slot. The maximum wattage you can pull through the PCIe slot is 75W. Anything more will need to be powered directly from the power supply using 6 pin or 8 pin connectors.

 

VRAM is only on the graphics cards so unless I'm missing something or you left some context out, you should be fine. 

CPU Cooler Tier List  || Motherboard VRMs Tier List || Motherboard Beep & POST Codes || Graphics Card Tier List || PSU Tier List 

 

Main System Specifications: 

 

CPU: AMD Ryzen 9 5950X ||  CPU Cooler: Noctua NH-D15 Air Cooler ||  RAM: Corsair Vengeance LPX 32GB(4x8GB) DDR4-3600 CL18  ||  Mobo: ASUS ROG Crosshair VIII Dark Hero X570  ||  SSD: Samsung 970 EVO 1TB M.2-2280 Boot Drive/Some Games)  ||  HDD: 2X Western Digital Caviar Blue 1TB(Game Drive)  ||  GPU: ASUS TUF Gaming RX 6900XT  ||  PSU: EVGA P2 1600W  ||  Case: Corsair 5000D Airflow  ||  Mouse: Logitech G502 Hero SE RGB  ||  Keyboard: Logitech G513 Carbon RGB with GX Blue Clicky Switches  ||  Mouse Pad: MAINGEAR ASSIST XL ||  Monitor: ASUS TUF Gaming VG34VQL1B 34" 

 

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, Mega2 said:

They've got the same slot size and all.

 

One interesting thing I will note is that the graphics card has a max power requirement of 47 W while the port is labelled as providing 25 W. Would that be acceptable?

This would be a server you are putting this into then?

The system, if it's a server, will not post, or rather it will, but it will throw an error about too much wattage from the GFX card, and the system will halt.

So anything over 25 watts will need to be provided by an external 6/8 pin connector.

 

NOTE: I no longer frequent this site. If you really need help, PM/DM me and my e.mail will alert me. 

Link to comment
Share on other sites

Link to post
Share on other sites

Any VRAM is ok, exceeding the power limit is not.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

27 minutes ago, Radium_Angel said:

This would be a server you are putting this into then?

The system, if it's a server, will not post, or rather it will, but it will throw an error about too much wattage from the GFX card, and the system will halt.

So anything over 25 watts will need to be provided by an external 6/8 pin connector.

 

Sounds good, thank you for the advice.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×