Jump to content

Hi guys. My gpu has problem. Sapphire logo rgb works as normal. But fans not spinning at all. No display. Only rgb works. 8 pin connector is connected properly. And it fits perfectly on pci slot. It just stopped working. No waranty. I know fans not works until specific temp but It must  start spinning when i start my pc. I have i5 3570. When i plug cable to IGPU. It works. But rx470 died i thing. But not rgb? Any ideas?

20201202_192828.jpg

Link to comment
https://linustechtips.com/topic/1276291-sapphire-rx470-nitro-problem/
Share on other sites

Link to post
Share on other sites

Reseat the GPU, then reconnect the 8-pin, and if that doesn't work it may be dead.

Specs:

- Motherboard: P8Z68-V LX

- CPU: i7-2600k (4.3ghz)

- RAM: Corsair Vengeance 2x4GB 1600mhz C9 (XMP enabled)

- GPU: MSI RX 570 ARMOR OC (1300mhz@1020mv core)

- HDD: WD Blue 1TB (2012) (WD10EZEX) (Arch Linux)

- SSD: Samsung 860 EVO 250GB (Windows 10)

- PSU: Some Rosewill 750w

- WiFi Card: TP-Link TX50E

- Monitor 1: Dell U2415 (1920x1200 60hz)

- Monitor 2: LG 22EA53 (1920x1080 60hz)

Link to post
Share on other sites

Be sure to clean out the PCI-E slot and the connecter. Possibly the 8-pin is supplying power to the RGB, but the PCI-E connection isn't working. Just a thought though.

Specs:

- Motherboard: P8Z68-V LX

- CPU: i7-2600k (4.3ghz)

- RAM: Corsair Vengeance 2x4GB 1600mhz C9 (XMP enabled)

- GPU: MSI RX 570 ARMOR OC (1300mhz@1020mv core)

- HDD: WD Blue 1TB (2012) (WD10EZEX) (Arch Linux)

- SSD: Samsung 860 EVO 250GB (Windows 10)

- PSU: Some Rosewill 750w

- WiFi Card: TP-Link TX50E

- Monitor 1: Dell U2415 (1920x1200 60hz)

- Monitor 2: LG 22EA53 (1920x1080 60hz)

Link to post
Share on other sites

6 minutes ago, Satyrn said:

Be sure to clean out the PCI-E slot and the connecter. Possibly the 8-pin is supplying power to the RGB, but the PCI-E connection isn't working. Just a thought though.

I connected on my other pc. But result was same. 

Link to post
Share on other sites

Did you clean off the connecter? Try a q-tip and some isopropyl alcohol maybe

Specs:

- Motherboard: P8Z68-V LX

- CPU: i7-2600k (4.3ghz)

- RAM: Corsair Vengeance 2x4GB 1600mhz C9 (XMP enabled)

- GPU: MSI RX 570 ARMOR OC (1300mhz@1020mv core)

- HDD: WD Blue 1TB (2012) (WD10EZEX) (Arch Linux)

- SSD: Samsung 860 EVO 250GB (Windows 10)

- PSU: Some Rosewill 750w

- WiFi Card: TP-Link TX50E

- Monitor 1: Dell U2415 (1920x1200 60hz)

- Monitor 2: LG 22EA53 (1920x1080 60hz)

Link to post
Share on other sites

1 hour ago, Levani14031998 said:

Yes i did. Im interested why rgb works if gpu is dead. I connected gpu on my both pc. But result is same. I think it has some problem on gpu motherboard

It's probably dead then.

Specs:

- Motherboard: P8Z68-V LX

- CPU: i7-2600k (4.3ghz)

- RAM: Corsair Vengeance 2x4GB 1600mhz C9 (XMP enabled)

- GPU: MSI RX 570 ARMOR OC (1300mhz@1020mv core)

- HDD: WD Blue 1TB (2012) (WD10EZEX) (Arch Linux)

- SSD: Samsung 860 EVO 250GB (Windows 10)

- PSU: Some Rosewill 750w

- WiFi Card: TP-Link TX50E

- Monitor 1: Dell U2415 (1920x1200 60hz)

- Monitor 2: LG 22EA53 (1920x1080 60hz)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×