Ripjaws V DDR4 3200mhz Ram

[jamesjoshua3]

Hello guys so i have recently bought Ripjaws V F4-3200 8gbx2 and i can see its not running at full speed, i have a Asus Prime B450-PLUS motherboard and i cant tell if this is the problem. Its running at 1067 Mhz and when i change it in the BIOS to 3200 the computer doesn't even start. Could someone please help me

[Guest]

System specs please.

[jamesjoshua3]

7 hours ago, ShrimpBrime said:

System specs please.

CPU: AMD Ryzen5 3600- 

GPU: 6GB GTX 1660 Ti Gigabyte gaming OC - 

CPU DeepCool GAMMAXX GT RGB - 

Motherboard: Asus Prime B450-PLUS 

SSD: Kingston A2000 NVMe™ M.2 500 gb -

RAM: 16g kit (8gx2) 2400 corsair vengeance lpx (black) - 

Hard Drive: Seagate 3.5" BarraCuda 1TB - 

Power Supply: Coolermaster MWE 80+ Gold Fully Modular 650W - 

Case: DeepCool EARLKASE RGB White V2

Single Fan: Coolermaster MasterFan MF140R RGB 

[Guest]

46 minutes ago, jamesjoshua3 said:

CPU: AMD Ryzen5 3600- 

GPU: 6GB GTX 1660 Ti Gigabyte gaming OC - 

CPU DeepCool GAMMAXX GT RGB - 

Motherboard: Asus Prime B450-PLUS 

SSD: Kingston A2000 NVMe™ M.2 500 gb -

RAM: 16g kit (8gx2) 2400 corsair vengeance lpx (black) - 

Hard Drive: Seagate 3.5" BarraCuda 1TB - 

Power Supply: Coolermaster MWE 80+ Gold Fully Modular 650W - 

Case: DeepCool EARLKASE RGB White V2

Single Fan: Coolermaster MasterFan MF140R RGB 

The board isnt good for higher memory frequency. Try 2933mhz and work your way up from there.

[jamesjoshua3]

9 hours ago, ShrimpBrime said:

The board isnt good for higher memory frequency. Try 2933mhz and work your way up from there.

I gave that a go in the BIOS but the computer just kept turning itself off, ive put it down to 2133Mhz and it works but still when i open up task manager and check its speed its still at 1067Mhz

[Guest]

13 minutes ago, jamesjoshua3 said:

I gave that a go in the BIOS but the computer just kept turning itself off, ive put it down to 2133Mhz and it works but still when i open up task manager and check its speed its still at 1067Mhz

That's cause it's DDR or double data rate. The 1067mhz is the effective clock times 2 = 2133mhz. What you see is correct.

 

But looking back at your posts that I didn't see earlier. The memory is 2400mhz. I didn't realize this whenI read the OP, the memory part number had F4-3200 had me assume it was 3200mhz Memory, I guessed wrong.

 

So we have to aim much lower this time around to 2400mhz or just enable XMP/DOCP.