Jump to content

First hardline pc

goovy20
By goovy20
in Build Logs
 Share
Posted

i dont see rgb. i see hours in the garage with a heat gun and various tools for bending.

 

still a pretty picture though.

PC specs:

Ryzen 9 3900X overclocked to 4.3-4.4 GHz

Corsair H100i platinum

32 GB Trident Z RGB 3200 MHz 14-14-14-34

RTX 2060

MSI MPG X570 Gaming Edge wifi

NZXT H510

Samsung 860 EVO 500GB

2 TB WD hard drive

Corsair RM 750 Watt

ASUS ROG PG248Q 

Razer Ornata Chroma

Razer Firefly 

Razer Deathadder 2013

Logitech G935 Wireless

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
21 minutes ago, jinglejangle101 said:

Imagine troubleshooting a faulty component in this. 

The RGB was harder :D

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
42 minutes ago, goovy20 said:

Hey, this is my first full hardline build. Does anybody have some good tricks for bleeding the loop ? TYIA

20201022_042500.jpg

Flip it upside down and rock and forth and side to side. I’d leave it upside down for at least a few days. Put some books under it to elevate it off the floor so you let the fans exhaust. 

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 minutes ago, eeeee1 said:

i dont see rgb. i see hours in the garage with a heat gun and various tools for bending.

 

still a pretty picture though.

rgb is trash using diiferent brands. The bends are also trash ;D

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, LIGISTX said:

Flip it upside down and rock and forth and side to side. I’d leave it upside down for at least a few days. Put some books under it to elevate it off the floor so you let the fans exhaust. 

I had it like 24 hours running the loop. That's not long enough probably ?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
4 minutes ago, goovy20 said:

I had it like 24 hours running the loop. That's not long enough probably ?

Upside down for 24 hours? 
 

My loops usually take a few days to get all the large bubbles out, and 1-2 weeks to get all the micro bubbles out. 

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, LIGISTX said:

Upside down for 24 hours? 
 

My loops usually take a few days to get all the large bubbles out, and 1-2 weeks to get all the micro bubbles out. 

24 hours upside down. The res. is vertical then... and top cap off

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, goovy20 said:

24 hours upside down. The res. is vertical then... and top cap off

Res should still be horizontal if you flip it upside down.... lol. It’ll just be at the top of the loop and will gather all the air bubbles in it. 

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
16 minutes ago, LIGISTX said:

Res should still be horizontal if you flip it upside down.... lol. It’ll just be at the top of the loop and will gather all the air bubbles in it. 

Do you think there is a possibility that the loop can suck air, with no leak of liquid ? Or i'm thinking to mechanical ?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, goovy20 said:

Do you think there is a possibility that the loop can suck air, with no leak of liquid ? Or i'm thinking to mechanical ?

Very much doubt it.

Rig: i7 13700k - - Asus Z790-P Wifi - - RTX 4080 - - 4x16GB 6000MHz - - Samsung 990 Pro 2TB NVMe Boot + Main Programs - - Assorted SATA SSD's for Photo Work - - Corsair RM850x - - Sound BlasterX EA-5 - - Corsair XC8 JTC Edition - - Corsair GPU Full Cover GPU Block - - XT45 X-Flow 420 + UT60 280 rads - - EK XRES RGB PWM - - Fractal Define S2 - - Acer Predator X34 -- Logitech G502 - - Logitech G710+ - - Logitech Z5500 - - LTT Deskpad

 

Headphones/amp/dac: Schiit Lyr 3 - - Fostex TR-X00 - - Sennheiser HD 6xx

 

Homelab/ Media Server: Proxmox VE host - - 512 NVMe Samsung 980 RAID Z1 for VM's/Proxmox boot - - Xeon e5 2660 V4- - Supermicro X10SRF-i - - 128 GB ECC 2133 - - 10x4 TB WD Red RAID Z2 - - Corsair 750D - - Corsair RM650i - - Dell H310 6Gbps SAS HBA - - Intel RES2SC240 SAS Expander - - TreuNAS + many other VM’s

 

iPhone 14 Pro - 2018 MacBook Air

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

This is impressive but when I hear about days of bleeding etc. I am glad I am 100% aircooled!

Intel i9-13900K - Gigabyte Aorus Z790 Elite DDR4 - Corsair Vengeance LPX 128GB DDR4 3200 C16 - Gigabyte Aorus Master RTX 4090 24GB - Corsair 4000D Airflow - 2x Samsung 980 Pro 1TB  - Corsair AX1600i 80 PLUS Titanium 1600W - Aorus FI27Q - Noctua NH-D15 running 3 fans (CPU) - 6 x NF-A12x25 (3 intake, 3 exhaust) - Aorus K1 - Aorus M5 - Aorus AMP500 - Aorus H5 - Corsair TC70 - Win 11 Pro

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Build Logs

×