3D printing help

[Trilex]

I am trying to print a diy version of the GOXLR. What is the best what going about this (see file). I need the top to be by itself but the bottom printed together. Problem is printing the quote for the bottom costs about 300$$$, so i am at a loss. Any solutions are appreciated. 

GOXLR Final.stl

[PriitM]

Big case. 240mm wide, thin walls, thick base. 

 

I would change the design to laser cut plastic panels, glue them together at these sizes (over 200mm)

[Kilrah]

Well firstly this STL is completely broken, so I wouldn't expect any quote based on it to be valid. And you'd want the 2 parts separated as 2 files.

[W-L]

On 10/6/2020 at 7:34 AM, Trilex said:

I am trying to print a diy version of the GOXLR. What is the best what going about this (see file). I need the top to be by itself but the bottom printed together. Problem is printing the quote for the bottom costs about 300$$$, so i am at a loss. Any solutions are appreciated. 

GOXLR Final.stl 4.43 kB · 5 downloads

As said that's not really a viable print project nor is it suited to be printed, you would be better off getting it made by a metal or plastics shop which can cut and bend it to shape.