Falling gpu fan

[Issei12]

Can I use a thermal paste to stick the connector of gpu fan

[Tan3l6]

3 minutes ago, Issei12 said:

Can I use a thermal paste to stick the connector of gpu fan

 

What do you mean? No need for thermal paste in any case.

[ImAlsoRan]

3 minutes ago, Issei12 said:

Can I use a thermal paste to stick the connector of gpu fan

Thermal paste is designed to go between the chip and the heatsink, not the heatsink and the fan.

[Issei12]

6 minutes ago, Tan3l6 said:

What do you mean? No need for thermal paste in any case.

I tried pushing it in and still comes off is super glue safe to use?

[Tan3l6]

5 minutes ago, Issei12 said:

I tried pushing it in and still comes off is super glue safe to use?

No. that fan seems beyond repair. But if you want you could try, just be careful with the glue.

Maybe use cable ties to connect another small fan to the GPU, but only at your own risk.

[RAS_3885]

4 minutes ago, Issei12 said:

I tried pushing it in and still comes off is super glue safe to use?

It appears the fan blade section is totally separated from the hub portion, which means it's likely not going to stay together again no matter what you do. You MAY be able to glue the motor hub back to the cooler frame, however, you cannot glue the spinning fan blade portion back to the motor hub (for what I hope are obvious reasons).

 

You'll be better off just attaching a new 90/120 mm fan to the cooler and plugging it into a header on your motherboard.