Thoughts on loop

[PunkoSr]

Looking to do a dual 120mm radiator setup for both CPU and GPU. This will only have 1 pump. The radiators would need to be setup with one at the front and one at the rear, both being near level with the CPU. Wanted to know what might be the best loop path to take with this setup. 

 

To make things easy to understand let's name the front radiator FR and the rear radiator RR.

 

[Moonzy]

What are you trying to cool? 2x120 isn't a lot for both CPU and GPU

[Mick Naughty]

Being level wont matter with a custom loop.

Setup wise, what ever looks good, or is easier to run. Or make it easier to drain/bleed. All up to you, can only give general rules as theres zero info about it.

But like stated, 240 worth or rad isnt much. I assume the hardware is old.

[Lipe123]

See the FAQ's and the 900 threads about "loop order does not matter"...

 

Just go nuts, the only rule you need to follow is: there has to be water for the pump to suck in, so typically your res will be above the pump but even that isn't always necessary.