Jump to content

HD 7770 How far can I push it?

samuel

Just bought an aftermarket cooler for it. The temps are lower than expected.

Original cooler: 1200 MHz core @ 1.214 v - afterburner failing in less than 3 min (temps did not stop rising). Now...45 degreeds in 15 deg ambient.

The question is:

will the VRM fail at 1.25v? My card doesn,t have a VRM heatsinc by default and installing those that came with aftermarket cooler is not possible. (capacitors all over the place, not enough room). I did however glued the memory heatsincs.

This is the video card:http://www.msi.com/product/vga/R77702PMD1GD5OC.html

with Arctic Cooling S1 plus and turbo module, moded by adding a second high performance pwm fan along with the turbo fan thingie, both controlled by the video card, just like the original cooler was.

FX8320 4.2Ghz@1.280v& 4.5 Ghz Turbo@1.312v Thermalright HR-02/w TY-147 140MM+Arctic Cooling 120MMVRM cooled by AMD Stock Cooler Fan 70MM 0-7200 RPM PWM controlled via SpeedfanGigabyte GA990XA-UD3Gigabyte HD 7970 SOC@R9 280X120GiBee Kingston HyperX 3K2TB Toshiba DT01ACA2001TB WD GreenZalman Z11+Enermax 140MM TB Apollish RED+2X Deepcool 120MM and stock fans running @5VSingle Channel Patriot 8GB (1333MHZ)+Dual Channel 4GB&2GB Kingston NANO Gaming(1600MHZ CL9)=14GB 1,600 Jigahurtz 10-10-9-29 CR1@1.28VSirtec High Power 500WASUS Xonar DG, Logitech F510Sony MDR-XD200Edifier X220 + Edifier 3200A4Tech XL-747H 3600dpiA4Tech X7-200MPdecent membrane keyboardPhilips 236V3LSB 23" 1080p@71Hz .

               
Sorry for my English....

Link to comment
Share on other sites

Link to post
Share on other sites

Spellings mistakes, sorry, was mobile and could not edit.

As I said: Failed furmark and capacitors all over the place- furmark test failed with the stock cooler and cannot install vrm heatsincs because of other components. (like caps and chokes)

FX8320 4.2Ghz@1.280v& 4.5 Ghz Turbo@1.312v Thermalright HR-02/w TY-147 140MM+Arctic Cooling 120MMVRM cooled by AMD Stock Cooler Fan 70MM 0-7200 RPM PWM controlled via SpeedfanGigabyte GA990XA-UD3Gigabyte HD 7970 SOC@R9 280X120GiBee Kingston HyperX 3K2TB Toshiba DT01ACA2001TB WD GreenZalman Z11+Enermax 140MM TB Apollish RED+2X Deepcool 120MM and stock fans running @5VSingle Channel Patriot 8GB (1333MHZ)+Dual Channel 4GB&2GB Kingston NANO Gaming(1600MHZ CL9)=14GB 1,600 Jigahurtz 10-10-9-29 CR1@1.28VSirtec High Power 500WASUS Xonar DG, Logitech F510Sony MDR-XD200Edifier X220 + Edifier 3200A4Tech XL-747H 3600dpiA4Tech X7-200MPdecent membrane keyboardPhilips 236V3LSB 23" 1080p@71Hz .

               
Sorry for my English....

Link to comment
Share on other sites

Link to post
Share on other sites

Repost. 

FX8320 4.2Ghz@1.280v& 4.5 Ghz Turbo@1.312v Thermalright HR-02/w TY-147 140MM+Arctic Cooling 120MMVRM cooled by AMD Stock Cooler Fan 70MM 0-7200 RPM PWM controlled via SpeedfanGigabyte GA990XA-UD3Gigabyte HD 7970 SOC@R9 280X120GiBee Kingston HyperX 3K2TB Toshiba DT01ACA2001TB WD GreenZalman Z11+Enermax 140MM TB Apollish RED+2X Deepcool 120MM and stock fans running @5VSingle Channel Patriot 8GB (1333MHZ)+Dual Channel 4GB&2GB Kingston NANO Gaming(1600MHZ CL9)=14GB 1,600 Jigahurtz 10-10-9-29 CR1@1.28VSirtec High Power 500WASUS Xonar DG, Logitech F510Sony MDR-XD200Edifier X220 + Edifier 3200A4Tech XL-747H 3600dpiA4Tech X7-200MPdecent membrane keyboardPhilips 236V3LSB 23" 1080p@71Hz .

               
Sorry for my English....

Link to comment
Share on other sites

Link to post
Share on other sites

Spellings mistakes, sorry, I,m mobile right now and cannot edit. Failed furmark and capacitors all over the place.

Ok thats lulz. What made you go on an extreme overclocking journey? Light blue caps ( standard for low end msi products) , wonder what that means.... :P

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×