Please help me with this gpu installation

[omg]

So i bought a new gpu gtx 1660 6 gb from zotac. I never had a gpu b4 only had intel graphics 4600. once it is connected my pc wont go past starting windows page. same as safe mode too.

all my pc specs are down below. pls help.

Processor- intel core i5-4440s 2.8 ghz (i know its bad)

Motherboard- asus h81m-cs with latest 2018 bios update (i know i know its bad too)

RAM- 8 gb

PSU-470w dnt know the name already scratched it away.

Monitor- acer aeropen 21'' 60hz 

Windows 7 ultimate 64 bit Service pack 1

 

p.s. i already checked my gpu was connected perfectlly with monitor and psu and slotted in pcie slot. My pc works fine without gpu tho.

[narrdarr]

Just checking you plugged your monitor into the gpu?

[kirashi]

13 minutes ago, omg said:

So i bought a new gpu gtx 1660 6 gb from zotac. I never had a gpu b4 only had intel graphics 4600. once it is connected my pc wont go past starting windows page. same as safe mode too.

all my pc specs are down below. pls help.

Processor- intel core i5-4440s 2.8 ghz (i know its bad)

Motherboard- asus h81m-cs with latest 2018 bios update (i know i know its bad too)

RAM- 8 gb

PSU-470w dnt know the name already scratched it away.

Monitor- acer aeropen 21'' 60hz 

Windows 7 ultimate 64 bit Service pack 1

 

p.s. i already checked my gpu was connected perfectlly with monitor and psu and slotted in pcie slot. My pc works fine without gpu tho.

Since it sounds like you see the BIOS POST screen (with the motherboard manufacturer's logo) and begin to see Windows booting, we know you've got some kind of display signal... now the trick is to find out why your display seems to be going blank after the Windows bootup process.

 

Is your monitor connected to the on-board motherboard video output, or the video output from your GPU?

Did you have a GPU installed previously? If so, you may need to use something like DDU to completely nuke the old drivers.

[omg]

So the thing is i plugged my monitor to gpu thru hdmi and the starting windows takes forever.( same with safe mode) and no black or blank screens just eternal starting windows. this is the very 1st gpu i m using btw. b4 this i only had intel integrated graphics. wen i change my gpu for on board graphics ( intel one) the windows loads just fine. hope i answered both of ur doubts.

[narrdarr]

so your saying you now have the the monitor plugged in to the gpu and you get a picture, but booting into windows takes longer?

[omg]

rather than saying booting into windows takes longer its forever. i spent 1 hour on that starting windows screen

 

[narrdarr]

ok try

type CMD in the windows search bar, open as admin,

type scf /scannow

once finished

type chkdsk /f/r

select y(yes) to reboot

let checkdisk run

 

clearing cmos-  shutdown pc, unplug power, remove battery from the from the motherboard wait a few 10-30 seconds putt battery back in.