Will I have space conflicts?

[Ravendarat]

He guys I wanna get a Dark Rock Pro 4 cooler, but im running a X570 MEG ACE board with 4 sticks of corsair vengeance RGB ram in a Meshify C case. Height for the cooler in the case appears to be fine but what about the cooler fitting over the ram or conflicts with the board as they have some big covers on the VRMs. Any one know if Im gonna have some clearance issues with this set up before I order the cooler?

[Ravendarat]

Ya I had found those but that doesnt really help with what Im concerned about. Its more and issue of potential conflicts with things like ram and VRM covers that have to tuck underneath it in some spots. The dimensions should fit in the case just fine, its the little things that arent represented in the simple L x W x H numbers that concern me

[LogicalDrm]

6 hours ago, Ravendarat said:

Ya I had found those but that doesnt really help with what Im concerned about. Its more and issue of potential conflicts with things like ram and VRM covers that have to tuck underneath it in some spots. The dimensions should fit in the case just fine, its the little things that arent represented in the simple L x W x H numbers that concern me

As long as motherboard follows ATX specs, you don't need to worry about VRMs. Only with smallest ITX boards that can be issue. But then again, you would have other space restrictions too.

 

Your RAM is 49-51mm tall (non pro vs pro) and cooler can fit 46mm tall under the fins. So not going fit well as cooler will overhang first RAM slot. As seen in here with TridentZ RGB: