Jump to content

Default ram really low.

Ashton4
 Share
Posted
  • Author
3 minutes ago, PineyCreek said:

When you "check it"...can you be more specific where/how you are seeing 1066MHz?  Also, what board? What memory kit? Model data?

I check it in nzxt cam and last time i checked in speccy.

Memory: G.Skill - Ripjaws V Series 16 GB (2 x 8 GB) DDR4-3200 Memory

Motherboard: Asus - ROG STRIX Z390-H GAMING ATX LGA1151 Motherboard

Link to comment
https://linustechtips.com/topic/1173713-default-ram-really-low/#findComment-13448051
Share on other sites
Link to post
Share on other sites
Posted

Right now you are running in 2133 mhz. Try turning on the xmp profile in the bios. That will set it to the rated speed. If you see either 1600 on the software you are using, then its running at 3200mhz.

Im with the mentaility of "IF IM NOT SURE IF ITS ENOUGH COOLING, GO OVERKILL"

 

CURRENT PC SPECS    

CPU             : Ryzen 5 3600 (Formerly Ryzen 3 1200)

GPU             : ASUS RX 580 Dual OC (Formerly ASUS GTX 1060 but it got corroded for some odd reasons)

GPU COOOER      : ID Cooling Frostflow 120 VGA (Stock cooler overheats even when undervolted :()

MOBO            : MSI B350m Bazooka

MEMORY          : Team Group Elite TUF DDR4 3600 Mhz CL 16
STORAGE         : Seagate Baracudda 1TB and Kingston SSD
PSU             : Thermaltake Lite power 550W (Gonna change soon as i dont trust this)
CASE            : Rakk Anyag Frost
CPU COOLER      : ID-Cooling SE 207
CASE FANS       : Mix of ID cooling fans, Corsair fans and Rakk Ounos (planned change to ID Cooling)
DISPLAY         : SpectrePro XTNS24 144hz Curved VA panel
MOUSE           : Logitech G603 Lightspeed
KEYBOARD        : Rakk Lam Ang

HEADSET         : Plantronics RIG 500HD

Kingston Hyper X Stinger

 

and a whole lot of LED everywhere(behind the monitor, behind the desk, behind the shelf of the PC mount and inside the case)

Link to comment
https://linustechtips.com/topic/1173713-default-ram-really-low/#findComment-13448055
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, MartinKweh said:

Right now you are running in 2133 mhz. Try turning on the xmp profile in the bios. That will set it to the rated speed. If you see either 1600 on the software you are using, then its running at 3200mhz.

I have xmp profile on

 

Link to comment
https://linustechtips.com/topic/1173713-default-ram-really-low/#findComment-13448062
Share on other sites
Link to post
Share on other sites
Posted
14 minutes ago, Ashton4 said:

Capture.PNG.a758dba3928f99f180f0ac6fb7cbd00f.PNG

Normal.  DDR - Double Data Rate memory.  1600 x 2 is 3200.  I run a 3200MHz 16GB (2x8GB) kit as well and mine shows the same.  Now if your original post is correct and it says 1066 somewhere, not 1600, you might have an issue.

 

Also...they made 1070's with only 4GB of video RAM?

Link to comment
https://linustechtips.com/topic/1173713-default-ram-really-low/#findComment-13448109
Share on other sites
Link to post
Share on other sites
Posted
  • Author
13 minutes ago, PineyCreek said:

Normal.  DDR - Double Data Rate memory.  1600 x 2 is 3200.  I run a 3200MHz 16GB (2x8GB) kit as well and mine shows the same.  Now if your original post is correct and it says 1066 somewhere, not 1600, you might have an issue.

 

Also...they made 1070's with only 4GB of video RAM?

no my 1070 is 8gb

Link to comment
https://linustechtips.com/topic/1173713-default-ram-really-low/#findComment-13448151
Share on other sites
Link to post
Share on other sites
Posted

Just run GPU z, and or CPU z that will tell you the actual stuff as well as the actual memory speed.

Im with the mentaility of "IF IM NOT SURE IF ITS ENOUGH COOLING, GO OVERKILL"

 

CURRENT PC SPECS    

CPU             : Ryzen 5 3600 (Formerly Ryzen 3 1200)

GPU             : ASUS RX 580 Dual OC (Formerly ASUS GTX 1060 but it got corroded for some odd reasons)

GPU COOOER      : ID Cooling Frostflow 120 VGA (Stock cooler overheats even when undervolted :()

MOBO            : MSI B350m Bazooka

MEMORY          : Team Group Elite TUF DDR4 3600 Mhz CL 16
STORAGE         : Seagate Baracudda 1TB and Kingston SSD
PSU             : Thermaltake Lite power 550W (Gonna change soon as i dont trust this)
CASE            : Rakk Anyag Frost
CPU COOLER      : ID-Cooling SE 207
CASE FANS       : Mix of ID cooling fans, Corsair fans and Rakk Ounos (planned change to ID Cooling)
DISPLAY         : SpectrePro XTNS24 144hz Curved VA panel
MOUSE           : Logitech G603 Lightspeed
KEYBOARD        : Rakk Lam Ang

HEADSET         : Plantronics RIG 500HD

Kingston Hyper X Stinger

 

and a whole lot of LED everywhere(behind the monitor, behind the desk, behind the shelf of the PC mount and inside the case)

Link to comment
https://linustechtips.com/topic/1173713-default-ram-really-low/#findComment-13448603
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×