PC PROBLEM

[scrappybuzz]

All right so basically I have a computer which held

gigabtye h110m-h-Cf rev 1.0

ram 8gb

intel Pentium G4560

gtx 1050

power supply was a casecom technology 550W

so basically I got a new psu and a new graphics card. One be like a Centauro 0600W 80 bronze and i also got  a GTX 1070. So me being me. I just unplugged my computer not doing anything like bios or whatever. And tried to see if my psu worked. So I unplugged the 24 pin or 12 pin I forgot but didn’t unplug anything else. And I plugged in the new psu and turned it on and I thought I got a broken psu because it didn’t turn on but after with some help and fully replacing the psu and putting the new graphics card in. I went to go plug in it. But to my suprise there was no display nor my keyboard or mouse didn’t connect. Later finding out that the 4 pin wasn’t connected then turning it on to find and hear 5 beeps then restarting and turning off restarting the same process 

after basically taking the pc apart and learning it is a CPU Error we tried taking out the cpu turning it on no beep. When putting the metal cover on And tightening it the 5 beeps happened. I also believe that my motherboard is fried as I can’t display or anything else. 

I’ve tried loads of things like taking out the battery re seating everything and nothing 

plz help :( 

 

[iMxmo]

13 minutes ago, scrappybuzz said:

All right so basically I have a computer which held

gigabtye h110m-h-Cf rev 1.0

ram 8gb

intel Pentium G4560

gtx 1050

power supply was a casecom technology 550W

so basically I got a new psu and a new graphics card. One be like a Centauro 0600W 80 bronze and i also got  a GTX 1070. So me being me. I just unplugged my computer not doing anything like bios or whatever. And tried to see if my psu worked. So I unplugged the 24 pin or 12 pin I forgot but didn’t unplug anything else. And I plugged in the new psu and turned it on and I thought I got a broken psu because it didn’t turn on but after with some help and fully replacing the psu and putting the new graphics card in. I went to go plug in it. But to my suprise there was no display nor my keyboard or mouse didn’t connect. Later finding out that the 4 pin wasn’t connected then turning it on to find and hear 5 beeps then restarting and turning off restarting the same process 

after basically taking the pc apart and learning it is a CPU Error we tried taking out the cpu turning it on no beep. When putting the metal cover on And tightening it the 5 beeps happened. I also believe that my motherboard is fried as I can’t display or anything else. 

I’ve tried loads of things like taking out the battery re seating everything and nothing 

plz help

 

Try starting it with the original PSU and with the original/or no gpu.

[iMxmo]

14 minutes ago, scrappybuzz said:

All right so basically I have a computer which held

gigabtye h110m-h-Cf rev 1.0

ram 8gb

intel Pentium G4560

gtx 1050

power supply was a casecom technology 550W

so basically I got a new psu and a new graphics card. One be like a Centauro 0600W 80 bronze and i also got  a GTX 1070. So me being me. I just unplugged my computer not doing anything like bios or whatever. And tried to see if my psu worked. So I unplugged the 24 pin or 12 pin I forgot but didn’t unplug anything else. And I plugged in the new psu and turned it on and I thought I got a broken psu because it didn’t turn on but after with some help and fully replacing the psu and putting the new graphics card in. I went to go plug in it. But to my suprise there was no display nor my keyboard or mouse didn’t connect. Later finding out that the 4 pin wasn’t connected then turning it on to find and hear 5 beeps then restarting and turning off restarting the same process 

after basically taking the pc apart and learning it is a CPU Error we tried taking out the cpu turning it on no beep. When putting the metal cover on And tightening it the 5 beeps happened. I also believe that my motherboard is fried as I can’t display or anything else. 

I’ve tried loads of things like taking out the battery re seating everything and nothing 

plz help

 

and you definetely didn't need a 600W PSU for this. Also the GTX 1070 with Intel Pentium? That's not going to get you any far.

[iMxmo]

15 minutes ago, scrappybuzz said:

All right so basically I have a computer which held

gigabtye h110m-h-Cf rev 1.0

ram 8gb

intel Pentium G4560

gtx 1050

power supply was a casecom technology 550W

so basically I got a new psu and a new graphics card. One be like a Centauro 0600W 80 bronze and i also got  a GTX 1070. So me being me. I just unplugged my computer not doing anything like bios or whatever. And tried to see if my psu worked. So I unplugged the 24 pin or 12 pin I forgot but didn’t unplug anything else. And I plugged in the new psu and turned it on and I thought I got a broken psu because it didn’t turn on but after with some help and fully replacing the psu and putting the new graphics card in. I went to go plug in it. But to my suprise there was no display nor my keyboard or mouse didn’t connect. Later finding out that the 4 pin wasn’t connected then turning it on to find and hear 5 beeps then restarting and turning off restarting the same process 

after basically taking the pc apart and learning it is a CPU Error we tried taking out the cpu turning it on no beep. When putting the metal cover on And tightening it the 5 beeps happened. I also believe that my motherboard is fried as I can’t display or anything else. 

I’ve tried loads of things like taking out the battery re seating everything and nothing 

plz help

 

at this point I think it's time for a FULL upgrade. CPU, Mobo, Ram and you can keep the 1070 as that's a good gpu. If you do decide to go this route people can help you in the New Builds and Planning section of the forum.

[scrappybuzz]

11 hours ago, iCypticx said:

can

So basically I tried with original psu same problem. But I’ll go with the full upgrade